Help in Microwave Office (MWO) - adaptation of antenna

Hi all,

If anyone work with MWO please help me to find out the adaptation of the antenna array below, by MWO, ( in f=0-70GHz), I can not find the good circuit in MWO neither good adaptation of array, so I need your help, thanks very much,

You can use the substrate which has eps=2.5, h=0.8mm, conductor is Cu.

Please upload here your MWO file created the equivalent circuit, thank you very much !

ps- we excite the port 50 Ohm at the head of stripline.

I give 100 pnts for the good help, tks.

Hello,

Find attached is the MWO project file of the requested antenna using EMSight simulations & Circuit Schematic model...


---manju---

Manjunatha,

Thank you very much, i appréciate your post, but may you help me to save the file in the version 7.05 plz; my version is awr7.05 so it cannot open your file, thanks.

ps- what MWO'version you have? thanks

Hello cuongtran,

Yes here is the MWO v7.0 files...

I use the latest MWO 2009 v9.0


---manju---