Confusion is Simulation Parameters

Hi,

I have lot of confusions in applying parameters for the simulation of Low pass filter.

The details of parameters are as follows:

fc=1GHz, Passband ripple= 0.1dB, Zo=50, dielectric constant =10.8, lenght of c = 7.11, lenght of l=9.81, width of c=4 and width of L=0.2.

Whether the values i applied in synthesis is correct. (attachment)..

Which values i should i apply in High and Low Impedance Line?

Then..How should i select the parameters for straight strip.


Please help me..

Thanks and Regards,

Sheik Md.S[/img]

Hi,

check these links, they are good one;

Examples on filter design (micro strip), it also contains some useful links
https://www.edaboard.com/ftopic353458.html


Microstrip Filter Design Help
https://www.edaboard.com/ftopic308472.html

Hi,
Thanks for ur response. But u know i have completed the theoretical calculation. I have parameters too. I'm newbie for IE3D. I dunno how to apply values in synthesis.

Please help me..