Problem with simulation results of coil design in HFSS
时间:03-31
整理:3721RD
点击:
I have designed a birdcage coil in HFSS and trying to simulate it.However i can never see expected result.I cannot be sure about the connections and boundary canditions.I have some questions.
1_) Can i assign capacitance or inductance to 2D geometry.
2_)Some of my parts are detached, how can i be sure of their conductances.Is the material that they are detached from important?
3) How can i connect 2D component to 3D component
4_)I have designed a coax(inner pec outer teflon) Is it true or do I need add something extra.
1_) Can i assign capacitance or inductance to 2D geometry.
2_)Some of my parts are detached, how can i be sure of their conductances.Is the material that they are detached from important?
3) How can i connect 2D component to 3D component
4_)I have designed a coax(inner pec outer teflon) Is it true or do I need add something extra.
Hello,
I have the same problems since I am sitting here and designing a birdcage coil. My problem is that this project needs to be finished next week, and I am very stressed out because the simulation won't work, so if you solved your simulation problems could you please be so kind to send me your project?
You would help me a lot.
my email:
norbert.bauer@gmx-topmail.de
greetz,
results simulation Problem 相关文章:
- unsual results when I increase the length of CPW in IE3D
- Help!! why my HFSS results is unreal !
- How results are shifted in HFSS for short Backfire Antenna
- Inductance from 2D/3D results in CST MWS
- help! about results of Allen Taflove's 3D UPML matlab code
- Checking the results of the H. Loui paper for TF/SF boundary