ADS .dxf file import: specific layer
时间:03-30
整理:3721RD
点击:
Hello ppl,
I have a 4 layer PCB stack up and the corresponding .dxf file imported in ADS. My doubt is that I know that layer 1 which is signal trace 1 corresponds to the .dxf layer Trace_01 and same is the case with signal trace 2 i.e Trace_04. Now between these two layers I have ground and Power supply so the stack up something like this (include dielectric after every layer)
Signal Trace 1
Gnd
Power Supply
Signal Trace 2
Now I am not able to understand how to import the GND and power supply planes as they are Pour_Outline 2 and Pour_Out,ine 3 in my .dxf files. But I want to import them as copper materials. Please help me with this import problem.
Thank you
Samkeet
I have a 4 layer PCB stack up and the corresponding .dxf file imported in ADS. My doubt is that I know that layer 1 which is signal trace 1 corresponds to the .dxf layer Trace_01 and same is the case with signal trace 2 i.e Trace_04. Now between these two layers I have ground and Power supply so the stack up something like this (include dielectric after every layer)
Signal Trace 1
Gnd
Power Supply
Signal Trace 2
Now I am not able to understand how to import the GND and power supply planes as they are Pour_Outline 2 and Pour_Out,ine 3 in my .dxf files. But I want to import them as copper materials. Please help me with this import problem.
Thank you
Samkeet
Maybe you can output as gerber, them import in ADS,PM Me ,i can help you.