Problems with sending a signal through a stripline
时间：03-30
整理：3721RD
点击：
I'm not sure if this is in the right section, but I am trying to send a bit stream through some striplines. For some reason, some of the transitions are being slowed down after passing through the stripline and I do not know why; it would make sense if all transitions were being affected, but it only seems to be some and not all of them. In the picture, v1_load is the signal coming out of the line, and v1_source is the signal coming into the line. The transitions at around 59.5ns and 68.5ns are slower than those of all the others.
The input and outputs are also well-matched to the characteristic impedance of the stripline, and the model is lossless for the time being. Thanks.
If this needs to be in a different section, please direct me there.
EDIT: I believe the problem is simply that the stripline I am using does not suit such a broad range of frequencies. Does anyone have the model for a stripline that can work up to 10GHz (broadband)? Thanks.
The input and outputs are also well-matched to the characteristic impedance of the stripline, and the model is lossless for the time being. Thanks.
If this needs to be in a different section, please direct me there.
EDIT: I believe the problem is simply that the stripline I am using does not suit such a broad range of frequencies. Does anyone have the model for a stripline that can work up to 10GHz (broadband)? Thanks.