微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 电磁仿真讨论 > HFFS: Create a Slot in a Waveguide WR 90

HFFS: Create a Slot in a Waveguide WR 90

时间:03-30 整理:3721RD 点击:
Hi, I'm new in HFFS and I have to design a slot in a Waveguide.

I have tryed with "subtract", subtracting 2 polygons (picture

), but I cannot get the correct result. How can I do it?

Thanks in advance.

Sergio

please send your HFSS File and clarify your aim in design ?

Hi, thanks for answer. I have to create a slot in a rectangular waveguide. In the slot I will put some material to measure. I'm not able to create the hole, and I cannot get the good result using the function "subtract" (the rectangle placed above the waveguide is where I want to create the slot).
My HFFS version is 11.

Regards,

Sergio

i said please hfss file but you send this !!! !
i attach example i hope it helpful

Sorry if a uploaded all the files, but I do not know what was the correct file you ask me. I tryed to study on your example but I still continue without understand how you did the slot. I will attach a photo to explain better what I did and the file of the project. This is only one file, and I have to compress it.

Thanks again for your help

Sergio

for design wave guide at first u should design a box and then u must design a box in side it for define your waveguide thickness and subtract
by copy u can design a similar box as same as second box for your air
then you should define another box for your slot and wave guide must be subtract

I got it. Many, many thanks :)

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top