Orthogonal Excitation in HFSS
时间：03-30
整理：3721RD
点击：
Hi all,
I am simulating a transmitarray unit cell in HFSS.
my simulation is based on a paper presented in a conference. In the paper it is said that the unit cell is excited by two orthogonal and linearly polarized waves in normal direction.
the structure is one glass substrate and two split ring slot metal on both sides of it and I put it in an air box with excitation boundary. Also, it is said that they simulated it with HFSS using periodic boundary conditions. I'm new with hfss. can you help me? how should set those two orthogonal excitation and periodic conditions?
Thank you in advance :)
I am simulating a transmitarray unit cell in HFSS.
my simulation is based on a paper presented in a conference. In the paper it is said that the unit cell is excited by two orthogonal and linearly polarized waves in normal direction.
the structure is one glass substrate and two split ring slot metal on both sides of it and I put it in an air box with excitation boundary. Also, it is said that they simulated it with HFSS using periodic boundary conditions. I'm new with hfss. can you help me? how should set those two orthogonal excitation and periodic conditions?
Thank you in advance :)
Orthogonal Excitation HFSS 相关文章：
- shifted orthogonal modes waveguide port
- orthogonal excitation and periodic boundary condition in hfss
- Excitation of substrate integrated waveguide with taper
- How can I set the plane wave excitation for theta=90 degree, phi=0~180 degrees
- TE mode excitation for circular patch antenna fed with coax-cable
- Waveport excitation and mode alignment