TE mode excitation for circular patch antenna fed with coax-cable
时间:03-29
整理:3721RD
点击:
Dear all
I am trying to excite the dominant mode "TE 11" as it have the best radiation pattern. the position for the coax-cable is supposed to touch the patch at the center of patch to have the best current and magnetic field distribution. the problem is when the feeder positioned at this place the only mode i get is the "TM 01", but when change the position other modes are appeared " the dominant is among these modes". is there any connection that could help to excite the dominant mode with the feeder touch the center?
https://imgur.com/a/KFU4C
I am trying to excite the dominant mode "TE 11" as it have the best radiation pattern. the position for the coax-cable is supposed to touch the patch at the center of patch to have the best current and magnetic field distribution. the problem is when the feeder positioned at this place the only mode i get is the "TM 01", but when change the position other modes are appeared " the dominant is among these modes". is there any connection that could help to excite the dominant mode with the feeder touch the center?
https://imgur.com/a/KFU4C
Feeding in the center of a patch is almost always the wrong location. Spend some time with one of the many books in the technical literature to get some ideas.
excitation circular TE 相关文章:
- Excitation of substrate integrated waveguide with taper
- How can I set the plane wave excitation for theta=90 degree, phi=0~180 degrees
- Appnote: The emModel view in ADS Momentum
- Software to simulate conducted emissions or similar
- Antenna Array Using Antenna Magus
- Step by step design of inductor and transmission line