How to view S11 parameter option in result window in HFSS?
I have imported a .sat file of uwb antenna from CST MWS to HFSS , After simulating i am unable to view the S11 parameter option in result window. can anyone help me ASAP.
Little clarification needed are you not able to see S matrix or S11 only?
To see S Matrix use HFSS>Results>solution data command
Be sure that proper solution model is chosen and ports are defined properly
Not able to see S matrix.
Just check the following
1. Have you chosen proper solution type?
2. Have you defined ports properly?
3. Have you defined solution setup with proper solution frequency
What you see when you execute HFSS>Results>Solution command
I am sure if all the above checks are correct you must be able to see solution matrix with S parameters
Ports are defined properly and solution type I have defined is Driven terminal.
Ok can you share the screenshot of what you get with
HFSS>Results>Solution command
If all is defined properly there must be some solution
Model simulation completed normally ?
There is no warning during validation?
What is solution setup?
sir,
Problem solved after changing solution type to Driven Modal.
Thank You.