微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微电子和IC设计 > 微电子学习交流 > 物理层算法和asic 还有软件开发 协议测试 系统集成 简历发ic@hi

物理层算法和asic 还有软件开发 协议测试 系统集成 简历发ic@hi

时间:12-12 整理:3721RD 点击:
总共9个职位挑对口的看 有朋友看机会可以推荐给我 简历发ic@hi-talent.net
咨询QQ: 983144394
职位一:  无线通信终端协议栈软件开发,集成或测试              
关键词:2G,3G,4G,协议栈,Layer 2,Layer3,L2,L3,MAC,RRC,NAS,软件开发,DSP
任职要求:                                                                            
通信/电子工程/计算机 硕士以上学位,无线通信终协议栈软件开发工作经验三年(含)以上;
有至少一项如下无线通信制式协议栈软件开发的工作经验:WCDMA,CDMA2000,TD-SCDMA,LTE;如果有3G和4G多模工作经验更好;
有独立深入发现问题,独立解决问题的能力,对出现的问题能够在技术上做最优决定;
优秀的C编程和阅读,嵌入式软件开发,调试技巧和能力;
良好的人际交往和跨地区团队技术沟通和协调能力;
良好的英语听,说,写能力;

Master's degree in Communications/ Electrical Engineering/Computer Science with >=3 years of mobile phone physical layer working experience;
Having at least one of the following wireless communication modes' mobile phone protocal stack development experience: WCDMA,CDMA2000,TD-SCDMA,LTE;3G/4G multimode experience is plus;
Capability of independent founding issues,independent solving issues and independent technical decision making;
Excellent C programming/reading, embedded software development and debugging skills;
Good interpernonal skills, Good cross sites/cross teams communication skills;
Good English lisening,speaking and writting.

职位描述:                                                                            
负责2G/3G/4G及多模终端芯片协议栈软件的设计、开发、调试、优化,测试与维护,以使芯片规模量产;
Design,develop,debug,optimize,test and maintenance the 2G/3G/4G/multi mode mobile terminal protocol stack software,and deliver it to mass production."                                                                            

职位二:无线通信终端物理层(L1)软件开发,集成或测试            
            
关键词:2G,3G,4G,物理层,Layer 1,L1,软件开发,DSP                                            
任职要求:
通信/电子工程 硕士以上学位,无线通信终端物理层开发工作经验三年(含)以上;
有至少一项如下无线通信制式物理层开发的工作经验:WCDMA,CDMA2000,TD-SCDMA,LTE;如果有3G和4G多模工作经验更好;
有独立深入发现问题,独立解决问题的能力,对出现的问题能够在技术上做最优决定;
优秀的C编程和阅读,嵌入式软件开发,调试技巧和能力;
良好的人际交往和跨地区团队技术沟通和协调能力;
良好的英语听,说,写能力;

Master's degree in Communications/ Electrical Engineering with >=3 years of mobile phone physical layer working experience;
Having at least one of the following wireless communication modes' mobile phone physical layer development experience: WCDMA,CDMA2000,TD-SCDMA,LTE;3G/4G multimode experience is plus;
Capability of independent founding issues,independent solving issues and independent technical decision making;
Excellent C programming/reading, embedded software development and debugging skills;
Good interpernonal skills, Good cross sites/cross teams communication skills;
Good English lisening,speaking and writting."                                                                                
职位描述:

负责2G/3G/4G及多模终端芯片物理层软件的设计、开发、调试、优化,测试与维护,以使芯片规模量产;
Design,develop,debug,optimize,test and maintenance the 2G/3G/4G/multi mode mobile terminal physical layer software,and deliver it to mass production."                                                                            
职位三:System Integration(9)系统集成
关键词:系统集成,协议测试,Modem测试,CDMA, CDMA2000, IS-95, TD-SCDMA, 1xRTT, WCDMA                                                                                        
任职要求
1)本科以上学历,计算机、通信、电子相关专业;
2) 具备两年以上无线通信系统研发或集成测试工作经验,有Android手机的全系统集成经验优先;
3) 熟悉2G、3G、LTE等无线通信协议,对物理层、高层协议都有一定理解;
4) 熟练使用相关测试仪表:综合测试仪、信号分析仪等;
5) 有良好的分析和解决问题的能力,有良好的团队合作精神
6) 具备熟练的英文读写和交流能力;
7) 有参加过手机芯片厂商协议测试和系统集成工作者优先。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent
2) Minimum 2 years experience on cellular development, system integration or modem test,experience on android system integration is a plus
3) Good understanding of cellular protocols of 2G/3G/LTE
4) Good mastery of communication testers usage
5) Good team work, and good issue analysis and problem solving capability
6) Good communication skill in both written and spoken English
7) Experience on mobile chipset certification test and system integration is a plus"                                                                              
职位描述
1) 制定Modem版本集成计划和版本计划,并根据计划生成相应软件版本
2) 制定每个软件版本的集成和测试用例以及进行相应用例开发
3) Modem版本的系统集成和基本验证,问题分析定位和协调解决
4) Modem与AP的全系统集成和基本验证,问题分析定位和协调解决
5) 推动处理跨Team的系统性问题分析和疑难问题的解决
6) 协助制定和优化版本管理和发布的流程和方法
Job Description
1)Define system integration plan and version plan, and to release modem versions accordingly.
2)Define integration test cases and develop related test cases.
3) System integration of modem releases, issue analysis and coordination of issue resolving.
4)System integration of modem+AP, issue analysis and coordination of issue resolving.
5)Coordinate critial system issues debugging and integration.
6) Assist to define and optimize modem release management and procedures."                                                                              
职位四:SW Tools 工具软件开发工程师                          
关键词:工具开发,产线工具,校准工具,8960,CMU200                                                            任职要求
1) 本科以上学历,计算机、通信、电子相关专业;
2) 熟悉VC/C++及Labwindows等编程语言,有扎实的编程功底,3年以上相关编程经验,有手机产线或研发工具开发经验优先;
3) 熟悉C Sharp (C#)编程、熟悉SQL应用开发优先;
4) 熟悉2G/3G相关通信协议,熟悉手机RF校准和测试原理和方法,熟悉串口/USB通讯、GPIB通讯、以太网通讯等;
5) 二年以上R&S, Agilent等无线通信测试仪器(8960, CMU200等)的手动操作及编程控制经验;
6)具有较强的团队合作精神、分析、学习及创新能力;
7) 具备熟练的英文读写和交流能力。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent
2) 3+ years experience on VC/C++ and labwindows, and experience on mobile phone RD or factory test tools development is a plus
3) Good mastery of C# programming and SQL application development is a plus
4) Good understanding of 2G/3G communication protocols, principle and procedures of RF calibration and test, UART/USB/GPIB/Ethernet communications
5)2+ years experience of communication testers control development (8960, CMU200, etc.)
6) Good team work, and good ability of issue analysis, study and and creative thinking
7) Good communication skill in both written and spoken English"                                                                            
职位描述
1) 3G终端射频校准和产线测试等软件、工具开发;
2) 硬件、软件研发调试或测试工具开发;
3) 仪器控制自动化开发和自动系统搭建;
4) 对现有的测试系统、测试流程、规范、方法、技术等进行改进。
Job Description
1)Tools SW development of RF calibration and factory test for 3G mobile phones, etc.
2)HW/SW RD debugging tools development.
3)Tester control development and automation.
4) Maintain and optimize existing toolset, test system and procedures."                                                                                  
职位五  协议软件测试工程师 9人
关键词:协议测试,Modem测试,CDMA, CDMA2000, IS-95, TD-SCDMA, 1xRTT, WCDMA
任职要求
1)本科以上学历,计算机、通信、电子相关专业;
2) 具备两年以上无线通信系统研发或测试工作经验;
3) 熟悉2G、3G、LTE等无线通信协议,对物理层、高层协议都有一定理解;
4) 熟练使用相关测试仪表:综合测试仪、信号分析仪等;
5) 有良好的分析和解决问题的能力,有良好的团队合作精神
6) 具备熟练的英文读写和交流能力;
7) 有参加过手机芯片厂商协议测试和系统测试工作者优先。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent
2) Minimum 2 years experience on cellular development or testing
3) Good understanding of cellular protocols of 2G/3G/LTE
4) Good mastery of communication testers usage
5) Good team work, and good issue analysis and problem solving capability
6) Good communication skill in both written and spoken English
7) Experience on mobile chipset certification test and system test is a plus"                                                                            
职位描述
1)根据产品需求以及设计制定产品的系统测试方案和相应的测试规范,并开发相应的测试用例;
2)构建自动测试环境,并编写测试脚本;
3) 执行2G/3G/LTE单模或多模终端的通讯协议测试;
4)执行2G/3G/LTE单模或多模终端的入网和运营商认证相关测试;
5)分析及协助开发人员解决协议测试中发现的各种问题。
Job Description
1)Define system validation test plan according to product features and spec, and develop corresponding test cases.
2)Set up auto test environment, and develop auto-test scripts.
3) Perform cellular protocol test for 2G/3G/LTE single mode or multimode terminals.
4)Perform CTA or operator related certification test for 2G/3G/LTE single mode or multimode terminals.
5)Perform issue analysis and assist RD to resolve the issues found in protocol tests."                                                                                
职位六:驱动软件开发工程师
关键词:驱动开发,SIM Driver, RF Driver, Modem Driver                                                                                               嵌入式操作系统、ARM
任职要求
1)本科以上学历,计算机、通信、电子相关专业;
2) 具备一年以上手机驱动软件开发和调试经验;
3) 熟悉手机硬件架构和相关接口通信协议,如USB, UART,SDIO等接口协议;
4) 精通C/C++编程,熟悉RTOS开发环境,有嵌入式RTOS环境下的编程和调试经验;
5) 有良好的分析和解决问题的能力,有良好的团队合作精神;
6) 具备熟练的英文读写和交流能力。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent.
2) Minimum 1 year experience on mobile phone driver SW development and debugging.
3) Good understanding of mobile phone HW architecture and related interfaces, such as USB, UART and SDIO.
4) Good mastery of C/C++ programming, and rich experience of development and debugging on RTOS environment.
3) Good team work, and good issue analysis and problem solving capability
6) Good communication skill in both written and spoken English"                                                                                    
职位描述
1) 基于硬件平台架构,进行驱动软件和硬件测试软件的设计;
2) 驱动软件和硬件测试软件的开发、调试;
3) 硬件测试和芯片验证,为上层软件提供驱动程序、OS和抽象层、程序框架等;
4) 参与联调及系统测试,进行问题分析、定位和解决。
Job Description
1)Mobile phone driver SW and HW test SW design
2)Development and debugging of Driver SW and HW Test SW
3) Chip verification and driver integration, and to provide driver/OS/Adaptation layer to upper layer.
4)Participate system integration and debugging, issue analysis and resolving."                                                                                    

职位七: 项目管理 Manager
关键词:项目管理,project management                                                                              
任职要求
1)本科以上学历,计算机、通信、电子相关专业;
2) 具备三年以上手机芯片或通信系统研发经验,以及两年以上通信类项目管理经验;
3) 熟悉从芯片设计到软件开发、系统测试的完整流程,有项目跟踪、资源协调等各阶段的工作经验;
4) 良好的质量管控意识和软件开发流程概念和执行经验
5) 具有良好的沟通能力及团队合作精神,组织策划能力强,执行、推动及管理能力强;
6) 具备熟练的英文读写和交流能力。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent.
2) 3+ years experience on mobile baseband chipset or cellular system development, and 2+ years experience on cellular project management.
3) Good understanding of the full procedues from chip design, SW development, till system test and certification, and rich experience of all different project phases.
4) Rich execution experience of quality assurance and software engineering processes.
5) Good communcation skills and team work spirit, strong leadership and management skills.
6) Good communication skill in both written and spoken English"                                                                            
职位描述
1) 负责Modem软件项目管理,包括项目计划制定、版本计划制定、软件开发任务跟踪,以及与公司其他软件团队之间的各种问题沟通交流;
2) 负责项目全周期的进度管理、风险识别和控制、资源协调与分配、内部外部沟通等;
3) 负责测试、认证相关方面的分项目管理,包括测试需求分析与确定、测试计划制定、测试资源安排、测试问题跟踪管理等。            
Job Description
1)Modem SW project management, including project planing, version planning, development task tracking, and cross-team coordination.
2) Schedule management, risk identification and cotnrol, resource coordination, and project communications across project life cycle.
3) Test and certification project management, including test planning, resource coordiantion, and issue tracking, etc."                                                                                  


职位八:软件配置管理工程师
关键词:软件配置管理,SCM, Clearquest                                                                            
任职要求
1) 本科以上学历,计算机、通信、电子相关专业;
2) 二年以上软件配置管理工作经验,同时有一年以上软件开发经验者优先;
3) 熟练使用Perforce, ClearQuest等配置管理工具的管理员功能;
4) 熟悉配置管理基本理论及工作流程;
5) 有良好的团队合作精神,交流、沟通和表达能力;
6) 具备良好的英文读写能力。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent.
2) 2+ year experience of SCM, and 1+ year SW development experience is preferred.
3) Good mastery of SCM SW tools as administrator (Perforce, ClearQuest, etc.)
4) Good understanding of SCM work flows and practices
5) Good team work spirit, organization and coordination skills
6) Good communication skill in both written and spoken English"                                                                            
职位描述
1) 协助制定项目配置管理计划,执行项目配置管理活动,进行项目的配置审核及进行配置状态报告
2) 负责软件版本构建、发布管理
3) 负责相关工具或平台的开发与部署实施,维护配置管理系统,保证项目的正常运作
4) 提交配置管理工作过程中的度量数据
5) 负责配置管理工具的培训普及工作
6) 负责配置管理业务流程的持续优化改进
Job Description
1)Assist to define project SCM plan, and perform SCM management activities
2) SW code release management
3) SCM related tools development and integration
4) SCM audit and metrics collection
5) SCM related training
6) Continuous improvement of SCM related procedures"                                                                              
职位九:软件质量管理工程师
关键词:软件质量,软件开发流程,SQA, Quality assurance,Quality Management, IPD, CMMI
任职要求:
1) 本科以上学历,计算机、通信、电子相关专业;
2) 二年以上SQA或CMMI软件质量管理经验,以及一年以上软件开发经验;
3) 熟练ISO9000/TL9000/CMMI等质量管理体系;
4) 有良好的团队合作精神,交流、沟通和表达能力;
5) 具备良好的英文读写能力;
6)具有ASQ CQE或PMP证书者优先。

Job Qualification
1) Bachelor degree or above in computer science, electrical engineering or equivalent.
2) 2+ year experience of SQA or CMMI practices, and 1+ year SW development experience.
3) Good mastery of SCM SW tools (Perforce, ClearQuest, etc.)
4) Good understanding of SCM work flows and practices
5) Good team work spirit, organization and coordination skills
6) Good communication skill in both written and spoken English"                                                                            
职位描述:
1) 协助制定产品开发的质量保证和控制流程
2) 建立开发和质量保证流程的标准作业指导书和Checklist
3) 执行质量保证计划和流程
4) 质量保证流程的执行跟踪和过程度量数据收集
5)质量流程的评估和优化改进
Job Description
1) Assist to establish quality assurance/control processes for product development
2) Define standard operation procedures and checklists for RD processes
3) Execute quality management plan and QM processes together with project PM
4) Quality performance tracking and metrics collection
5) Quality assessment and analysis for process improvement"                                                        


物理层算法工程师的JD:

l  工作职责
n  负责移动通信系统物理层算法的设计与仿真;
n  负责移动通信系统物理层算法架构定义:HW/SW划分、实时系统开发;
n  负责移动通信系统物理层算法在硬件环境的仿真验证;
n  负责移动通信系统物理层算法的功能和性能验证与优化;

l  职位要求
n  通信工程、信号处理及电子工程等相关专业研究生及以上学位,两年以上相关工作经验;
n  具有扎实的移动通信理论基础,熟悉无线通信系统物理层算法设计开发(CDMA2000, TD-SCDMA, WCDMA, OFDM, MIMO, LTE, WiMax, …)。具有CDMA2000经验者优先考虑;
n  熟练使用C/C++, Matlab, SPW等仿真工具进行移动通信系统物理层仿真;
n  具有物理层链路搭建、仿真script文件开发经验者优先考虑;
n  了解ASIC的开发、测试流程,了解VHDL或Verilog语言;
n  具备良好的英文资料读写及沟通能力;
n  对工作耐心细致,认真负责、富有团队合作精神和创新精神;


ASIC  JD:

工作内容:
1.      参与手机基带芯片MODEM的体系结构设计,模块及设计,RTL设计与验证。
2.      参与芯片设计前端流程。
3.      参与FPGA的调试、验证和芯片调试、验证。

职位要求:
1.      微电子,通信相关专业硕士毕业,三年或以上工作经验
2.      熟悉数字IC设计,包括RTL设计,debug。
3.      熟悉数字通信系统原理,有通信系统MODEM IC的设计经验。
4.      熟悉ASIC前端设计流程以及相关EDA工具。
5.      具备良好的英语听说读写能力。
6.      具备以下任一经验者优先: 有手机基带芯片设计经验(WCDMA/TD/CDMA2000/LTE),熟悉SOC体系结构以及低功耗设计。

Grace Li @ Hi-Talent Consulting Co. , Ltd.
上海芯得企业管理咨询有限公司
E-Mail: bestgrace@qq.com
QQ: 2862465331
Best Regards,
Jane.Jin
Principal Consultant & General Manager @ Hi-Talent Consulting Co.,Ltd.
上海芯相会企业管理咨询有限公司
上海芯得企业管理咨询有限公司
Mob:        18502155252
Skype:      ScarlettJaneJin
E-Mail:      Jane-Jin@Hi-Talent.net
QQ:         983144394
Blog:        http://blog.sina.com.cn/u/1716864892
Weibo:      http://weibo.com/u/1716864892
webside:   www.hi-talent.cn
[img]http://cli.im/qr/3204734?NU7nR[/img]


Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top