高手救命呀

               我现在用RS274X出 光绘文件.可是在CAM350中复合层之后所有的ANTIETCH线全部没有了,提示错误为光圈文件 用的尺寸为0,我 以前一直用G6X00出,头一次用RS274X出.不知道是不是负片层的设置有问题呀,另外有正确 用 RS274X出GERBE的文档吗,请各位大虾救命呀

Undefined line width 忘记设置了?

不是，提示以下错误：

================================================================
     PROCESSING FILM < pag02.art > ...
================================================================

  FILM PARAMETERS :
  ---------------------------------------------------------
  Undefined line width                6.00
  Suppress shape fill on neg film     NO
  Mirror code                         NONE
  Rotate angle                        NONE
  Offset x:                           0.00
  Offset y:                           0.00
  Plot negative                       YES
  Suppress unconnected internal pads  NO

    WARNING: No Photoplot Outline was found,
negative shape outline will be determined by Board Outline

说我的负片层没有outline,可是我已经划了呀，是不是antietch线不能住板框呀