hfss equation based surface

Salam

I have used the HFSS, though not much. Still I am learning about it. According to my experience you can not draw the triangle it self. But if you want to make some conical shape that is possible. As in the case of horn antenna just it is matter of conecting the surfaces.

Regards
Asim

just go >draw>line and draw a triangle formed
by three lines but make sure you close the
surface. If the surface is not cover go to
>3Dmodeler>surface>cover faces....

you can also use equation to draw a triangle.

Draw-> equation based surface

or
Draw-> equation based curves.

Based on my view of points, the latter is more accurate than the first.

its simple u can use coordinate entry method and draw triangle and then fill the enclosed area

double click after you have drawn 3 points and 2 lien segments.

Use Draw line to form trangle or any other geometry in 2D. Then Select the object, copy it and paste to get a duplicate. Now use move to position for the desired thickness. Then select the two oblects (Control + click), from the menu select 3D Modeller > Surface > connect to get the 3D model.

thanx, its good stuff