please help very fast
By using cst microwave stodio software I want to design and fabricate microstrip patch antenna for wimax application the frequency is 3.5Ghz where:
substrate is FR4 :permitivity is 4.3,thickness of substrate is 1.6
patchis copper : thickness is 0.07,
Zo is 50 ohm
and i used microstrip line for feedind and if i want to used coax feed how to find the position for the feed
can any one help me to find the dimension bcz im begginer in cst
and write to me how to find all dimension for (substrate and feed and patch) and which the equations he used by exel for all this dimension if possible.
If you are to deserve a Master's degree, you need to do the work. And you should work on your time management skills so that next time you dont need assistance "very fast"
Have Fun
with srry for this words, I dont share this site for fun but for develop and take knowledgement from expert, thank u for (tallface65) for replay
OK..I have no clue what you are trying to say. However, as an elaboration to my comment...you are best off going through tutorials on creating projects in CST (or whichever tool you prefer) Coming here and asking for what appears to all the "answers" is not the best approach to get help from "experts" It is best if you create a project and give something to work off of. This topic was bound to never receive a constructive response as you come off as needing much more help than people are willing to offer on their free time. Show some effort and perhaps someone will be much more likely to assist you.\
Have fun
try to attempt to do it and post your problem here , instead of asking and waiting for someone to post complete work for you.... you many or may not get it.. but it will be waste of time............
so start the work and ask for help when you get stuch anywhere....
thank u for advice
I have the dimension and the execution for software i attached
i use FR4: Er=4.3,hight =1.6mm, patch and
ground is copper anealed thickness is 0.07 mm
all dimension i get by formula and attached
which is better using feed ?strip line or coax feed?
for stripline i get the width and length and i want to check from attached , but
for coax feed i dont know to find the dimmeter for outer and inner dimetter and location feed