Measuring Coupling between CPW and Probe (rookie needs help)
时间：04-07
整理：3721RD
点击：
Hi Everyone.
I am relative new to HFSS, so I really could use some help to this one problem.
Im trying to measure the coupling between a Coplanar waveguide and a probe.
I have excited my CPW with to lumped ports, placed my probe 10 microns over the CPW and placed a Wave port on top of the probe (which is where i would like to measure the output of the coupling).
But this, weirdly enough, creates cut-off in my S parameters for the CPW. (Which where not there if system simulated without the waveport)
So I think it might be due to configuration of the waveport.
This might come as a silly question, but is there a way to only use the waveport as "receiver"?
Hope that somebody can help me.
// Mads
I am relative new to HFSS, so I really could use some help to this one problem.
Im trying to measure the coupling between a Coplanar waveguide and a probe.
I have excited my CPW with to lumped ports, placed my probe 10 microns over the CPW and placed a Wave port on top of the probe (which is where i would like to measure the output of the coupling).
But this, weirdly enough, creates cut-off in my S parameters for the CPW. (Which where not there if system simulated without the waveport)
So I think it might be due to configuration of the waveport.
This might come as a silly question, but is there a way to only use the waveport as "receiver"?
Hope that somebody can help me.
// Mads
Coupling Measuring rookie 相关文章：
- problem: coupling coefficient for two hairpin resonators
- Loose Coupling for a coaxial resonator
- Methods of decreasing the coupling between two closely placed antennas
- Re: Polynomial synthesis in coupling matrix technique
- Capacitive coupling between coaxial and coplanar circular coils
- Increasing stages coupling without increasing capacitance in TRX