How to design a matching N/W using EM momentum simulation in ADS
时间：04-06
整理：3721RD
点击：
Hello
I have tried to imrove my S21 but it comes worst at 94Ghz.
Can anyone plz help me how to use EM simulation in ADS as I m new to this option. I have to use CPW lines at 94GHz for matching my n/w but steps r unknown I got o/p power -15_dbm & PAE= 19% by load pull mtd. at -10_dBm i/p Power. I think this happened due to mismatch so EM simn will take into account all parasitic,coupling ,skin effects & will bring accurate result.
Can anyone make me aware d basic design steps to use Momentum
PLease help me
Thanks Ragini
I have tried to imrove my S21 but it comes worst at 94Ghz.
Can anyone plz help me how to use EM simulation in ADS as I m new to this option. I have to use CPW lines at 94GHz for matching my n/w but steps r unknown I got o/p power -15_dbm & PAE= 19% by load pull mtd. at -10_dBm i/p Power. I think this happened due to mismatch so EM simn will take into account all parasitic,coupling ,skin effects & will bring accurate result.
Can anyone make me aware d basic design steps to use Momentum
PLease help me
Thanks Ragini
- I/Q baseband Modulator Demodulator
- ADS schematic to layout
- NFC System with antenna which can provide from 1 A/m to 7.5 A/m signal strength
- Why are all reference sensitivity requirement of all bands different in WCDMA (UMTS)
- itemdef.ael not found while trying to place a SmithChart smart component
- Using ADS2019, How to set and measure tempature values for LNA?