Coaxial feed dimensions

I want to know the coaxial feed dimensions of a Hfss Microstrip patch antenna design working at 4.64GHz,
I want to go for the fabrication of the antenna i want to know the dimensions of the coaxial probe
plz reply as soon as possible.
If possible give the name of the standard available coaxial cable and also give the inner and outer diameters of it

try downloading HFSS antenna design kit. its free. it has antenna models with different kinds of feeds.

thnx for ur reply
i want to go for the antenna fabrication we have to make hole in the ground plane for pushing the coaxial cable inner diameter through it,can you give the radius of the hole to be made in the hardware kit

---------- Post added at 20:31 ---------- Previous post was at 20:28 ----------

Also can you give the name of the 50 ohm coaxial probe which is used for giving the input to the patch antenna

I see. This dimension also depends on the cable you are using. I just measured a few connectors and inner cables in the lab and the diameters vary between 1 to 1.3 mm

---------- Post added at 16:18 ---------- Previous post was at 16:13 ----------

go to farnell.com and search for sma connectors. may be something like this might work:
http://uk.farnell.com/multicomp/19-1...ole/dp/1169629