Lossly metal reflection on CST 2010
时间：04-06
整理：3721RD
点击：
Hello everyones!
I'm trying to simulate the reflection from a thin layer of lossly metal (in ,my case NiCr).
as we know the resistence of a thin layer (smaller then the skin depth) should be constant.
I connect a 100nm NiCr layer to the end ofa coaxial cable and simulate the S11 from this layer.
after calculating the load on the endg of the cable i got frequency dependens as like a normal metal [(1+i)Rs].
can anyone help me with that?
Tnx :)
I'm trying to simulate the reflection from a thin layer of lossly metal (in ,my case NiCr).
as we know the resistence of a thin layer (smaller then the skin depth) should be constant.
I connect a 100nm NiCr layer to the end ofa coaxial cable and simulate the S11 from this layer.
after calculating the load on the endg of the cable i got frequency dependens as like a normal metal [(1+i)Rs].
can anyone help me with that?
Tnx :)
metal Lossly reflection 相关文章：
- Metal patterns in PCBs
- ERROR 21: The metallic edge for the excitation does not exist (error in CADFEKO)
- modeling a metal plate with a conductivity
- Metals touching, produce EM waves
- Effect of metal resistivity on the characteristic impedance of microstrip line
- Metal enclosure not grounded is shield for HF?