spiral inductor hfss
But I don't know how to set boundary and port.
Does anyone have ?
thanks
You can find under 'draw' a user defined primitive that is a square coil.I put a ground (GND) plane under the coil, assigning it the property of PEC to it and then connected the GND to the coil by a cylinder of some conducting material. I draw a rectangle between the other extremity of the coil and the GND assigned it a lumped source. To view the far field you can draw a rectangle sorrounding the structure and assigning it the boundary 'radiation'. I hope it's something useful to you
Added after 48 minutes:
sorry I mean sorrounding it by a box...
thanks for your feedback.
could you pls send your HFSS project to me ?
I am designing a planr spiral inductor on Silicon substrate.
How to setup the dielectric material between spiral inductor and its underpass ?
I always meet this mistake
There is one good example in Chapter 10 of HFSS fullbook v10.0.
I'm uploading the file, but I think it's very basic. Bye!
- Questions for Dr. Mühlhaus Spiral Inductor Assistant for Sonnet
- Defining Lumped port in 3D spiral coil for different values of sweep in HFSS
- [HFSS] How to simulate a spiral antenna (many details in the post)
- ADS Spiral Inductor on Silicon Example - Inductance Calculation Problem
- how to build a Archimedean Spiral antenna model in HFSS
- Spiral inductor simulation