微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 电磁仿真讨论 > How to determine the radius for probe, coax, coax pin and the height for coax in HFSS

How to determine the radius for probe, coax, coax pin and the height for coax in HFSS

时间:03-31 整理:3721RD 点击:
my problem is how to determine the radius for probe,coax,coax pin and the height for coax

link makes sense for calculating dimensions of coax

good luck


http://www1.sphere.ne.jp/i-lab/ilab/tool/cx_line_e.htm

thanx man that was gud.....
hey can u guide me on a problem i have...

see i am making an H shaped microstrip antenna in hfss......

i made a substrate of given dimensions using box option......which material is prefferable for the substrate
1. rt duroid
2 vacumm?


for making the ground plane i made a rectangle at bottom and assignes perfectly dielectric to it.....similarly i made the patch using rectangle at the top using rectangle giving it perfectly electric boundary conditions to it


should i make these things of box type with some height for better results or its ok?


how much the coaxial dimensions affect the results of this structure?


i want to short the patch and ground....how should i do it/?

First ; you have to decide about bandwidth and resonance frequency. dielectric permittivity effect on bandwidth and frequency. (air small banwidth etc.)

second you have to draw H shaped patch over dielectric and also assign it perfect E,
Ground plane should be assigned perfect E with infinite or finite ground plane option, (Also you need a cut on it for coax probe)
Dielectric box doesnt need assignment of perfect etc.

third; dielectric box height effects banwidth and also resonance frequency. Similiar condition exist on coax measures too. Cos impedance changes with dimensions.

good luck[/b]

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top