Coil Antenna Feeding in HFSS
时间:03-31
整理:3721RD
点击:
Hi everyone,
This is my first post on the forum, and as a student my knowledge is still not on top, but i hope i can get your help, and learn a little more.
I must set a simulation for a coil antenna at 13,56 MHz in Hfss. I had to import the design from SolidWorks, add it to the model and assign a material to it.
In order to observe the S11 parameter and the radiation pattern, i must feed the antenna from the input transmission line.
Since the device has no ground plane or substrate, i really don't know how to simulate the feeding, and what type of port to use.
Thank you for your help
Antoine
This is my first post on the forum, and as a student my knowledge is still not on top, but i hope i can get your help, and learn a little more.
I must set a simulation for a coil antenna at 13,56 MHz in Hfss. I had to import the design from SolidWorks, add it to the model and assign a material to it.
In order to observe the S11 parameter and the radiation pattern, i must feed the antenna from the input transmission line.
Since the device has no ground plane or substrate, i really don't know how to simulate the feeding, and what type of port to use.
Thank you for your help
Antoine
You should make your SW model relfect the reality of how will you physically attach the antenna to the feed. I have done somthing like this before in SW and analyzed it with HFWorks.