CST warning for lossy material
时间：03-31
整理：3721RD
点击：
hi there
i am simulating a microstrip power divider and in order to have good match between fabricated and simulated results i thought to include dielectric loss and metal loss. i am simulating with FR4 substrate havng loss tangent of 0.022 and instead of using PEC i am using copper.
after simulating i am getting this warning msg "substrate within in the region of port 1 has very high losses. the accuracy may be degraded in this case"
help me to overcome this problem
with regards
lkminz
i am simulating a microstrip power divider and in order to have good match between fabricated and simulated results i thought to include dielectric loss and metal loss. i am simulating with FR4 substrate havng loss tangent of 0.022 and instead of using PEC i am using copper.
after simulating i am getting this warning msg "substrate within in the region of port 1 has very high losses. the accuracy may be degraded in this case"
help me to overcome this problem
with regards
lkminz
- CST Postprocessing of multiple S-parameters (single frequency parameter extraction)
- Shielding Simulation in CST
- Illegal usage of S-Matrix, No impedance found error in cst
- Line impedance in CST
- CST dual polarized H-slot antenna is very well matched but has poor total efficiency
- CST Matlab Interface, Export Far Field Result Automatically