Maxwell 14 - Simple 2D Electrostatic Problem - What's wrong with the field plot?
时间：03-31
整理：3721RD
点击：
Just to do a quick test of Ansoft Maxwell 14, I decided to run a very simple 2D problem from the v12 User's Guide - a coaxial capacitor - in a "cylindrical about Z" geometry.
Following the steps in the guide, I set up and ran the problem...which took only a few minutes...and got the correct value of capacitace: 2.723 pF (the same value stated in the guide).
But when I went to plot the E field (vector) between the conductors, I got this meaningless result:
Whereas the guide shows this result:
Does anyone know what could"ve gone wrong with this?
Following the steps in the guide, I set up and ran the problem...which took only a few minutes...and got the correct value of capacitace: 2.723 pF (the same value stated in the guide).
But when I went to plot the E field (vector) between the conductors, I got this meaningless result:
Whereas the guide shows this result:
Does anyone know what could"ve gone wrong with this?
I do not understand what is wrong with the electric field you obtained.
Simple Electrostatic Maxwell 相关文章：
- Simple problem with circular coil simulation on CST
- Simple Questions about Plane Wave Excitation in HFSS
- HFSS simple ring resonator filter
- Why this simple microstrip line in CST & HFSS has different response?
- Simplest way for testing 42GHz oscillator
- A simple Question abouT Class B RF Power Amplifier