CST memory exception error for nanosize structure
时间:03-31
整理:3721RD
点击:
Dear all
I tried to simulate nanoscale (50nm) microstrip line in CST for the S-parameters at 100 GHz range. i ended up getting this message, port memory exception. Is it because the mesh size is too small? I have tried to optimize the size but i want to at less maintain 4 mesh at transverse direction.....
Can anyone explain to me what can be the problem?
thank you
HSU
I tried to simulate nanoscale (50nm) microstrip line in CST for the S-parameters at 100 GHz range. i ended up getting this message, port memory exception. Is it because the mesh size is too small? I have tried to optimize the size but i want to at less maintain 4 mesh at transverse direction.....
Can anyone explain to me what can be the problem?
thank you
HSU
What is the number of mesh cells that you are using for the entire problem? You may not have enough memory ram on you computer.
- CST Postprocessing of multiple S-parameters (single frequency parameter extraction)
- Shielding Simulation in CST
- Illegal usage of S-Matrix, No impedance found error in cst
- Line impedance in CST
- CST dual polarized H-slot antenna is very well matched but has poor total efficiency
- CST Matlab Interface, Export Far Field Result Automatically