aplac simulation examples

Hello,

Which Version of AWR Microwave Office (MWO) you use...
I have tutorial example for specific version...

Also if you have Aplac then it has a built in MEMS models library...

Here are the some of the documents on AWR MWO & APLAC for mems applications...

http://www.mwr.medianis.net/pdf/Vol1...osavljevic.pdf

http://docs.google.com/www.fayoum.ed...f/DrGalal7.pdf

http://duepublico.uni-duisburg-essen...s/GM0018-F.pdf

---manju---

Hi manju,

am using AWR 6.51. and am looking for the tutorial on the design of MEMS capacitive switches. the docs which you gave werent helping me in my work. kindly share with me any other document you might have.

Hello,

Then you can only use EMSight Electromagnetic simulator for planar modelling of RF MEMS structure...
Here is an example
http://amsacta.cib.unibo.it/343/1/Eug_1_5.pdf

specifically see this
http://www.mel.diei.unipg.it/limbo/d...0PG%202007.pdf

If you have the latest MWO 2008 & APLAC then you can model & completely simulate the switch structure...

---manju---

Hi All,

Can anyone help me with some simulation examples or tutorials on using APLAC MEMS elements in recent AWR versions?

Thanks in advance.

Hello Yammuna,

It is probably more difficult to bring the MEMS into new MWO environment than to work with standalone APLAC.
In standalone APLAC there are some good working examples that comes with the product installation.

I attached some of the very useful documents on APLAC Capacitive Switch...


---manju---

hi....
can any one tell me how to implement a phase shifter in microwave office? i'm using a AWR 2008 version and the desired phase shifter should work for 60 GHz.....
thanks in advance

Hello

you have two very good examples on Phase shifter design & analysis in AWR MWO very specifically you can go through the MEMS_Phase_Shifter.emp file & also Ideal_Phase_Shifter.emp

---manju---

hi manju,
thanks a lot for the reply. i tried implementing a 60 degree phase shifter based on the phase shifting properties of a high pass t circuit as given in this paper. but when i try simulating the circuit, it shows an error as shown below
Measurement - phase_shift:PhsShift(1,1,60,0) : At least two phase states (sweeps) are required to make this measurement.
can u tell me what is reason for this error?

hi manju,
i also went through the Ideal_Phase_Shifter.emp file in the examples. but the working range is from 0 to 20 GHz. how to modify it for 60 GHz?