What's the correct boundary condition in this project?
时间：03-30
整理：3721RD
点击：
Dear friends
I embedded an implant antenna in an skin tissue model of the body using CST program and then, I used Electric (Et=0)on the all faces of the Tissue model.
I want to calculate SAR,S parameter and radiation pattern of this implant antenna.
Is this type of boundary condition right or not?
what's the correct boundary condition in this case?
I embedded an implant antenna in an skin tissue model of the body using CST program and then, I used Electric (Et=0)on the all faces of the Tissue model.
I want to calculate SAR,S parameter and radiation pattern of this implant antenna.
Is this type of boundary condition right or not?
what's the correct boundary condition in this case?
boundary correct project 相关文章：
- Assigning boundary and Lumped port to 3D spiral coils in HFSS
- Boundary 'PerfectE1' and boundary 'Rad2' overlap
- Why lumped port must be at the boundary?
- HFSS Master/Slave boundary conditions: Contact maps are ambiguous execution error
- Defining boundary condition in electrostatic solver in Comsol
- how to define PML boundary?