微波EDA网，见证研发工程师的成长！ 2025婵犵數濮撮惀澶愬级鎼存挸浜炬俊銈勭劍閸欏繘鏌ｉ幋锝嗩棄缁炬儳娼￠弻鐔告綇閸撗呮殸缂備胶濯崹鍫曞蓟閵娾晜鍋嗛柛灞剧☉椤忥拷04闂傚倸鍊搁崐鎼佸磹妞嬪海鐭嗗〒姘ｅ亾妤犵偞鐗犻、鏇㈡晜閽樺缃曢梻浣虹帛閸旀洟骞栭銈囦笉妞ゆ牜鍋為悡銉╂煟閺囩偛鈧湱鈧熬鎷�28闂傚倸鍊搁崐鎼佸磹妞嬪海鐭嗗〒姘ｅ亾妤犵偞鐗犻、鏇㈡晝閳ь剛绮ｅΔ浣虹闁瑰瓨鐟ラ悘鈺冪磼閻欌偓閸ㄥ爼寮婚妸鈺傚亞闁稿本绋戦锟� 闂傚倸鍊搁崐鎼佸磹妞嬪海鐭嗗〒姘ｅ亾妤犵偞鐗犻、鏇㈠Χ閸屾矮澹曞┑顔结缚閸樠冣枍瀹ュ洠鍋撶憴鍕；闁告濞婇悰顕€宕堕澶嬫櫌婵犵數濮撮幊澶愬磻閹捐閿ゆ俊銈勮兌閸欏棝姊虹紒妯荤闁稿﹤婀遍埀顒佺啲閹凤拷濠电姷鏁告慨鐑藉极閹间礁纾婚柣鎰惈閸ㄥ倿鏌涢锝嗙缂佺姳鍗抽弻鐔虹磼閵忕姵鐏堢紒鐐劤椤兘寮婚妸鈺傚亞闁稿本绋戦锟�

CST MWS: S-Parameters

时间：03-30 整理：3721RD 点击：

I am simulating a coaxial cable in CST MWS and I have the results in S-Parameter form, i.e. Frequency Domain. Now I would like to transform them, FFT, into the Time Domain so that I can look at the reflections from discontinuities. Is there a way to do this in CST MWS, or will have to use additional software? Any help would be greatly appreciated.

Thanks,

Leegit

Leegit,

You can run under template based post processing -> Time Signals -> TDR from S parameter. This will give you impedance vs time which then you may be able to see the effect of discontinuities. ... depending on the frequency range of the S parameters and the distance from the source the discontinuity is.

Whoever can help

My question is: i designed an simple hertz dipole array(ex. 2x2) which i fed ports by discrete port for each element, so i have 4 discrete ports in this example. In the results i received s parameters of 4 results: s1, s2, s3, s4, but they had different results and 02 results of them is ok (in return loss) but the others is not ok. how can i combine those 4 results become one result?
Thank a lot
Minh

上一篇：Opera 2d electromagnetic generator
下一篇：最后一页

CST MWS Parameters 相关文章：

栏目分类