ADS momentum problem: differential ports for microstrip
时间：03-30
整理：3721RD
点击：
hello every one,
i am designing a wilkinson power divider in ADS momentum, so to place a resister between the two output arm i draw a microstip line from each arm. when i insert port at the end of these microstrip lines, and trying to define the type of ports i get this message
" Port P4 cannot be associated with port number 5.
If they are in the same reference plane, and you want to associate them:
Please set both ports to the correct Port Type before
setting ^Associate with port number^ "
ok from reference plan i understand is either they are on the same x-axis or same y-axis, but how to resolve this issue, can any one help me.
Thanks in Advance
Best regards
i am designing a wilkinson power divider in ADS momentum, so to place a resister between the two output arm i draw a microstip line from each arm. when i insert port at the end of these microstrip lines, and trying to define the type of ports i get this message
" Port P4 cannot be associated with port number 5.
If they are in the same reference plane, and you want to associate them:
Please set both ports to the correct Port Type before
setting ^Associate with port number^ "
ok from reference plan i understand is either they are on the same x-axis or same y-axis, but how to resolve this issue, can any one help me.
Thanks in Advance
Best regards