array setup +HFSS...tips required

Dear friends

array of 2 dipoles can b created by selecting array setup from HFSS options.
there v need to mention U & v vectors and cell positions. No of cells etc.

But how do we get our resluts if we wnt to get far field pattren for 90 degree out of phase fed dipoles.

We just had mentioned only one lumped port...now how we set second port to same model.

can some one suggest me.how we set up an array?

2-d planner array of 2 dipoles,separated at 0.125mm.

hope that u will help me out.
thx

I think when you define an array, the results displayed take into account the same setup as for a single element.
You can verify this by checking the gain/field strength of the antenna with and without the array setup. If the gain is more in the array setup, its taking the second port into account by itself..

Ananth.

if u can send me hfss file of ur dipole i can simulate n tell you

akedar thankyou very much for considering my request.
Brother i have built the array and resolved the problem.
I will ask you in future for any assistance.

how to set up 1D dipole array with 4 elements separated by lambda/4.?what is u and v vector?help me please