Simulating UCPBG with HFSS.
I want to simulate a UCPBG cell with HFSS.
To obtain the characteristics of the UCPBG cell, the scattered fields (reflection phase) are needed to be known.
Let's see what I've done, then get to the problem:
1) create the ground.
2) create the substrate.
3) create the UCPBG cell.
4) create the Air.
5) define the boundries as:
ground and UCPBG cell as "PEC".
the top face of the Air box as "radiating surface"
the other 4 faces of the Air box are definde as 2 pairs of "master" and "slave".
6) define an excitation:
A plane wave form the bottom (0,0,0)
7) Simulate the project.
!
Now I am wondering how to see the characteristics of this cell.
I mean I cannot see any "reflection phase" term in the:
HFSS --> RESULTS --> CREATE REPORT --> TRACE .
Now what should I do?
(P.S. I see somewhere that a POLYLINE should be definde to see the reflection phase!
Is that correct? If yes, how?)
Thank you for your attention.
I have the same problems, and I download an HFSS model, but I have no idea of how to get the reflection phase.
https://www.edaboard.com/viewtopic.php?t=165921
if you can't get the phase switch to using hfss v11 and it has Floquet ports you can use instead of using the PML boundaries
I cannot use HFSS v11, I use v9.2.
why are you still using 9, is it an illigal version? i am using 11 now and it seems to be alot better than 9
Thank you allfnot,
I'm using ver 10 right now, may be switch to ver 11 later, but
what do you suggest me for now?
Thank you in advance.
Some companies they do not purchase the maintenance fee, so they don't get the priviledge of future upgrades. Hence, not always the case of illegal use.
Hi masud, it supprise me coz your two months for this problem. Could u send me your mail box, I will send a file for you to see the phase, I set the waveport different from you.
Some companies they do not purchase the maintenance fee, so they don't get the priviledge of future upgrades. Hence, not always the case of illegal use.