微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 电磁仿真讨论 > 13.56MHz antenna simulation HFSS(simulation results and actual results are differect)

13.56MHz antenna simulation HFSS(simulation results and actual results are differect)

时间:03-30 整理:3721RD 点击:
Hi all
Thanks for your help.
I'm simulating a curve antenna under 13.56MHz . Thickness is 5um. Width is 76um.


practically, I measured the inductance is 5.5uH.

But the simulation result is 300uH with single lumped port.



I tried double lumped ports. The result is 54uH.



My settings are as follow:
solution frequency 13.56MHz
sweep type is interpolating.
frequency setup if 13MHz-14MHz 0.01MHz

There are two questions,
1.Should I set single lumped port or double lumped ports? why
2.By which method can I get about 5.5uH in simulation ?
thank you for your help

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top