微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 电磁仿真讨论 > Epsilon r of Salt Water

Epsilon r of Salt Water

时间:03-27 整理:3721RD 点击:
Has somebody an idea where I can find information about the epsilon r and conductive values of water with different amount of salt in it?

hi
For seawater,

er = 80
s = 4600 mS/m

regards

piboo

I would say, the real part of epsilon remains the same, but an imaginary part with the parameter sigma*frequency*mju0 gets there also, making the refractive index a complex number, thus represanting the attenuation of the electromagnetic field.

I guess, finding an instrument that measures conductivity wont be hard, or you might even calibrate your own setup with copper rods. check out http://www.biophysica.com/conductivity.htm
where they state

Absolute pure water - 0.055 μS/cm
Distilled water - 0.5 μS/cm
Mountain water - 1.0 μS/cm
Most drinking water sources - 500 to 800 μS/cm
Sea water - 56 mS/cm
Max for potable water - 1055 μS/cm

Thanks for the information.
Do you know where I can find a table (or a formula) of the salt content and conductivity?
I want to know if the conductivity of water increases linear with the salt content.

I looked here
http://waterontheweb.org/under/water...ductivity.html
and the conductivity seems to depend somewhat on exactly which salts are dissolved, which of course is not exactly the same in different bodies of water.

上一篇:macromodelling with spice
下一篇:最后一页

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top