Netlist extraction from HFSS
时间：03-25
整理：3721RD
点击：
Currently, I'm trying to start work with HFSS software.
I did simple stripline and I want to export it's model to cadence virtuoso. I can export it by s2p file and use it with nport, but I want to get it in a netlist view too.
So, I found there are two able spice netlist types: full wave spice and lumped element low bandwidth netlist (by the way, is there any ability to specify for which frequency netlist is generated?). The second one is usual spice netlist and I can import it in cadence without any problem.
I'm wondering how to use first one in cadence simulations? It is looks like this:
There are port's resistance into netlist, what I should do if I want to check this stripline with sp analysis in cadence (where port already has resistance)?
I did simple stripline and I want to export it's model to cadence virtuoso. I can export it by s2p file and use it with nport, but I want to get it in a netlist view too.
So, I found there are two able spice netlist types: full wave spice and lumped element low bandwidth netlist (by the way, is there any ability to specify for which frequency netlist is generated?). The second one is usual spice netlist and I can import it in cadence without any problem.
I'm wondering how to use first one in cadence simulations? It is looks like this:
Code:
subckt Strip_line_Full ( 1 2 ) Vam1 ( 1 n2 ) vsource type=dc dc=0 Rport1 ( n2 0 ) resistor r=50 isnoisy=no Vam2 ( 2 n4 ) vsource type=dc dc=0 Rport2 ( n4 0 ) resistor r=50 isnoisy=no ...
Netlist extraction HFSS 相关文章：
- why this netlist can't be simulated in hsim?
- [ADS] ADS netlist error
- Is ADS 2009 netlist simulation from command line impossible compared to ADS 2014?
- Error generating netlist when importing momentum component into schematic
- PEX-output-netlist-use names from option
- Question. Extraction of L / C params of a microstrip in FDTD