微波EDA网,见证研发工程师的成长!
首页 > 研发问答 > 微波和射频技术 > 电磁仿真讨论 > [moved] How to define integration line for this antenna?

[moved] How to define integration line for this antenna?

时间:03-25 整理:3721RD 点击:
Hi

I would like to know how should I define the integration line for this kind of antenna ?
Is it ok to define the integration line as in the file "antenna with integration line.jpg" ( red line)? If not, then the arrow should be pointing in which way?






Thank you

I forgot to mention but I am using HFSS software. I would like to know in which direction the arrow (integration line) should be pointing?

i think your using lumped port excitation, in that case, the interation line is taken from the top conductor to the bottom conductor ( in this case your feed line)

Do you mean like in this attached picture ?

If I try to define like that, it tells me ¨Lines can only be created on select surfaces¨
It's like my integration line must be inside the excitation plane ( must be drawn inside that rectangle ).
Whenever I click outside of that rectangle it says ¨Lines can only be created on select surfaces¨
Does anyone know why and how I could solve this?

send me your file

I prefer to get explanations.

Yes, the line is between "signal" and "ground" of the port, usually the shortest possible path.
In your post #1 picture, you draw it on a feedline, that makes no sense.

Have a look here: http://hfss13.blogspot.de/2012/05/in...ion-lines.html

Copyright © 2017-2020 微波EDA网 版权所有

网站地图

Top