feko coaxial

Does anyone experience coaxial cable feeding design in Feko?
Let's say if I wanna design a coaxial cable undernearth the infinite ground plane and use the inner conductor for antena excitation!
It is quite easy in MWS, but in FEKO...
Please share me any example or any advice!
Thanks in advance!

im having the same problem.... i think the A4 card on EDITFEKO models a coaxial port .I tried using that but didnt succeed.Let me know if you have better luck

hey i just figured out how to give a coaxial feed.
First delete any existing meshing, voltage source and port on the CADFEKO.Mesh the geometry and save the file.
Then switch to EDIT FEKO , add the A4 control card.
- select set source and specify your co-ordinates for the probe location
-check the transform impedance to ground plane
The other settings are pretty straight forward.

Hope this helps.