Modelsim后仿真，SDF文件加载错误
时间：10-02
整理：3721RD
点击：
请教：
XILINX生成的标准时延文件，用MODELSIM后仿真，标准时延文件SDF文件加载失败，
错误结果：
# Loading C:/Modeltech6.2b/xilinx_lib/simprim_ver.X_ONE
# Loading C:/Modeltech_6.2b/xilinx_lib/simprim_ver.X_ZERO
# Loading work.glbl
# ** Error: (vsim-SDF-3894) netgen/par/count4_timesim.sdf: Compiled SDF file was not found.
# Loading C:/Modeltech_6.2b/xilinx_lib/simprim_ver.sffsrce
# ** Error: (vsim-7) Failed to open SDF file "netgen/par/count4_timesim.sdf" in read mode.
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-SDF-3445) Failed to parse SDF file "netgen/par/count4_timesim.sdf".
#Time: 0 psIteration: 0Region: /count4_tbFile: C:/Modeltech_6.2b/examples/test/count4_tb.v
# Error loading design
xilinx元件库已经编译，且加入到了MODELSIM workspace中。
能有什么办法解决么?
XILINX生成的标准时延文件，用MODELSIM后仿真，标准时延文件SDF文件加载失败，
错误结果：
# Loading C:/Modeltech6.2b/xilinx_lib/simprim_ver.X_ONE
# Loading C:/Modeltech_6.2b/xilinx_lib/simprim_ver.X_ZERO
# Loading work.glbl
# ** Error: (vsim-SDF-3894) netgen/par/count4_timesim.sdf: Compiled SDF file was not found.
# Loading C:/Modeltech_6.2b/xilinx_lib/simprim_ver.sffsrce
# ** Error: (vsim-7) Failed to open SDF file "netgen/par/count4_timesim.sdf" in read mode.
# No such file or directory. (errno = ENOENT)
# ** Error: (vsim-SDF-3445) Failed to parse SDF file "netgen/par/count4_timesim.sdf".
#Time: 0 psIteration: 0Region: /count4_tbFile: C:/Modeltech_6.2b/examples/test/count4_tb.v
# Error loading design
xilinx元件库已经编译，且加入到了MODELSIM workspace中。
能有什么办法解决么?
已解决，把xilinx产生的netgen文件夹与Modelsim工程放在同一个Modelsim目录文件夹里面。
学习一下！
路径问题
以前也遇到过
路径问题。
亲们 注意路径要用绝对路经 而且注意要用反斜杠 / 分隔啊 不能用\