ICC后带寄生用PT进行STA，min_capacitance违例需要修改吗？求大神解疑，急！

Report : constraint

-all_violators

-path slack_only

Design : Digital

Version: C-2009.06-SP3

Date: Mon Jun 13 16:05:47 2016

****************************************

min_capacitance

RequiredActual

PinCapacitanceCapacitanceSlack

-----------------------------------------------------------------

uut_filter/M5/C1/buffda_G1B1I808/Z

0.040.030.00(VIOLATED: increase significant digits)

uut_spi_slave/U527/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U528/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U529/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U530/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U531/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U532/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U533/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U534/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U535/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U536/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_spi_slave/U537/ZN0.000.000.00(VIOLATED: increase significant digits)

uut_filter/M5/C1/U38/CN0.010.010.00(VIOLATED: increase significant digits)

uut_filter/CTS_clk_in_delay3/Z

0.020.010.00(VIOLATED: increase significant digits)

uut_filter/M4/B1/U58/CN0.010.010.00(VIOLATED: increase significant digits)

uut_filter/M4/B1/U83/CN0.010.010.00(VIOLATED: increase significant digits)

uut_filter/M5/C1/U114/CN0.010.010.00(VIOLATED: increase significant digits)

uut_filter/M7/U14/Z0.010.010.00(VIOLATED: increase significant digits)

uut_filter/M7/U47/Z0.010.010.00(VIOLATED: increase significant digits)

uut_filter/M3/A2/dout_tem_reg[13]/Q

0.010.010.00(VIOLATED: increase significant digits)

uut_filter/M7/CTS_clk_in_delay10/Z

0.050.050.00(VIOLATED: increase significant digits)

uut_filter/M4/B1/a2_reg[18]/Q

0.010.010.00(MET)

RTL设计中有173个float点，使用矩形图检查min_capacitance时，图形如下：

目前已经把单元尺寸可以改小的改小了，插入buffer并没有效果（以前的单元pin无违例，其后加入的buffer输出端违例）。如果需要修复这类违例，有什么方法可以不需要重新在ICC中进行CTS，直接在route阶段就可以修复此类违例的吗?求大神解疑

急急急

输出端cap违例, 可以size_cell，或者fanout过大，调整fanout

cell已经是最小的了，如果换成较大的cell，min_cap反而会加大

急急急急！跪求各位大神解疑

fanout过大吧?set_max_fanout