出allegro 16.6 出gerber老是出提醒，跪求解答
SILKSCREEN-BOT created with warnings
SILKSCREEN-TOP created with warnings
PASTEMASK-BOT created with warnings
PASTEMASK-TOP created with warnings
SOLDERMASK-BOT created with warnings
SOLDERMASK-TOP created with warnings
BOTTOM created with warnings
VCC created
GND created
TOP created with warnings
INN1 created with warnings
INN2 created with warnings
哪位大侠帮忙指导一下，谢谢！
Results from parameter file ...
DEVICE-TYPE GERBER_RS274X
OUTPUT-UNITS INCHES
FILM-SIZE 2400000 1600000
FORMAT 3.5
ABORT-ON-ERROR NO
SCALE 1
SUPPRESS-LEAD-ZEROES YES
SUPPRESS-TRAIL-ZEROES NO
SUPPRESS-EQUAL YES
UNDEF-APT-CONT NO
================================================================
PROCESSING FILM < DRILL >
TO FILE < F:/GM8138S_HW_V1_0/0305/DRILL.art > ...
================================================================
FILM PARAMETERS :
---------------------------------------------------------
Undefined line width 6.000
Suppress shape fill on neg film NO
Mirror code NONE
Rotate angle NONE
Offset x: 0.000
Offset y: 0.000
Plot negative NO
Suppress unconnected internal pads NO
Draw holes only NO
WARNING: 0 width line found at (-890.000 2942.000)
... using undefined line width of 6.000
WARNING: Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 6.000
WARNING: text composed 0 width line found at (-440.500 7531.500)
... using undefined line width of 6.000
WARNING: text having Multiple 0 width lines; all will be treated the same as the first.
... using undefined line width of 6.000
APERTURES USED:
---------------------------------------------------------
TYPE SIZE/NAME ROT MIRROR MODE
---------------------------------------------------------
CIRCLE 0.00600 DARK
DRILL created with warnings，这是其中一段，不是很理解
warning 可以不管
很担心，害怕有什么问题，有没有大侠能解答的?
我们的警告都忽略不管！