出gerber时遇到的警告，求助！
时间：10-02
整理：3721RD
点击：
---- Photoplot outline rectangle not found ... using drawing extents
Thu May 06 06:48:45 2010 Page 1
Photoplot log file
Results from parameter file ...
WARNING: Segment with same start and end points at
(5840.755 609.999) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(5841.237 609.999) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4950.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4949.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4850.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4849.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3900.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3899.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3800.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3799.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3700.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3699.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
请问这些属于什么问题，如何解决?万分感谢！
Thu May 06 06:48:45 2010 Page 1
Photoplot log file
Results from parameter file ...
WARNING: Segment with same start and end points at
(5840.755 609.999) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(5841.237 609.999) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4950.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4949.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4850.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(4849.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3900.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3899.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3800.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3799.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3700.424 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
WARNING: Segment with same start and end points at
(3699.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
请问这些属于什么问题，如何解决?万分感谢！
哪位高手能解释一下?如果我不管它，出来的板子会有问题吗?
16.2出的吧?
没有画板框吧
是15.5的版本，但16.2也会出，板框我也加了。
还请高手指点！
WARNING: Segment with same start and end points at
(3799.585 195.000) will be ignored. Increasing output
accuracy may allow segment to be generated.
就这句话我不明白
解决了，谢谢上面两位
就我遇到的情況，warning基本不用管。只要不出error就沒有問題。
刚刚遇到，求解！寻高手解决~~~~~~~~~~
现在回帖怎么那么多限制了~
我也遇到了同样的问题，楼上的咋解决的，说出来让大家可看明白！
怎么搞定的，讲一下呀