关于cadance 将原理导入allegro 出现的问题
时间：10-02
整理：3721RD
点击：
今天在将sch导入PCB的时候碰到这样的问题,以下是相应的session log：
CmdLine: netrev.exe -5 -y 1 -i e:\source-work\bcm97455mb_v10\allegro E:\SOURCE-WORK\BCM97455MB_V10\200-115745-0000Gp1.brd C:\Documents and Settings\lance ying\桌面\qq.brd
------ Preparing to read pst files ------
Starting to read e:/source-work/bcm97455mb_v10/allegro/pstchip.dat
Finished reading e:/source-work/bcm97455mb_v10/allegro/pstchip.dat (00:00:00.20)
Starting to read e:/source-work/bcm97455mb_v10/allegro/pstxprt.dat
Finished reading e:/source-work/bcm97455mb_v10/allegro/pstxprt.dat (00:00:00.39)
Starting to read e:/source-work/bcm97455mb_v10/allegro/pstxnet.dat
Finished reading e:/source-work/bcm97455mb_v10/allegro/pstxnet.dat (00:00:00.42)
------ Oversights/Warnings/Errors ------
WARNING: U4101 component device pin number mismatch; cannot replace.
#1 ERROR(302) Device library error detected.
Error with pin number 'AC16' in device 'BCM7401B0_1_BGA676_35X35_050_SK': 'Unable to find pinname in adfncpin.'.
#2 ERROR(302) Device library error detected.
Problems building functions in device 'BCM7401B0_1_BGA676_35X35_050_SK': 'Unable to find pinname in adfncpin.'.
Device 'BCM7401B0_1_BGA676_35X35_050_SK' has library errors. Unable to transfer to Allegro.
WARNING: J2608 component device pin number mismatch; cannot replace.
------ Summary Statistics ------
#3 ERROR(102) Run stopped because errors were detected
netrev run on Dec 24 21:15:56 2007
DESIGN NAME : 'BCM97455MBV10_XX'
PACKAGING ON Jun 17 2005 00:56:10
那位朋友能够帮助分析一下问题在那里，谢谢！
CmdLine: netrev.exe -5 -y 1 -i e:\source-work\bcm97455mb_v10\allegro E:\SOURCE-WORK\BCM97455MB_V10\200-115745-0000Gp1.brd C:\Documents and Settings\lance ying\桌面\qq.brd
------ Preparing to read pst files ------
Starting to read e:/source-work/bcm97455mb_v10/allegro/pstchip.dat
Finished reading e:/source-work/bcm97455mb_v10/allegro/pstchip.dat (00:00:00.20)
Starting to read e:/source-work/bcm97455mb_v10/allegro/pstxprt.dat
Finished reading e:/source-work/bcm97455mb_v10/allegro/pstxprt.dat (00:00:00.39)
Starting to read e:/source-work/bcm97455mb_v10/allegro/pstxnet.dat
Finished reading e:/source-work/bcm97455mb_v10/allegro/pstxnet.dat (00:00:00.42)
------ Oversights/Warnings/Errors ------
WARNING: U4101 component device pin number mismatch; cannot replace.
#1 ERROR(302) Device library error detected.
Error with pin number 'AC16' in device 'BCM7401B0_1_BGA676_35X35_050_SK': 'Unable to find pinname in adfncpin.'.
#2 ERROR(302) Device library error detected.
Problems building functions in device 'BCM7401B0_1_BGA676_35X35_050_SK': 'Unable to find pinname in adfncpin.'.
Device 'BCM7401B0_1_BGA676_35X35_050_SK' has library errors. Unable to transfer to Allegro.
WARNING: J2608 component device pin number mismatch; cannot replace.
------ Summary Statistics ------
#3 ERROR(102) Run stopped because errors were detected
netrev run on Dec 24 21:15:56 2007
DESIGN NAME : 'BCM97455MBV10_XX'
PACKAGING ON Jun 17 2005 00:56:10
那位朋友能够帮助分析一下问题在那里，谢谢！
1.在路径里不要有中文,
2.在'BCM7401B0_1_BGA676_35X35_050_SK'找不到pin number 'AC16'检查元件库PIN脚是否和原理图一直！
恩，就是楼上的美眉说的原因，除了将路径改成没有中文之外，就是检查你的原理图器件和PCB封装是否一致了
路径内没有中文，pcb的封装也从新建了一个，应该没有错，原理封装看不出问题，结果还是一样，不知道那里出错了。 请各位指点一下。苦闷啊！
1、e:\source-work\bcm97455mb_v10\allegro E:\SOURCE-WORK\BCM97455MB_V10\200-115745-0000Gp1.brd C:\Documents and Settings\lance ying\桌面\qq.brd
库和netlist的路径不要太深，你这个太深了，建议越简单越好，起名字不要有空格，用_代替。比如： d:\work\netlist\
2、封装对应检查仔细
3、还不行请再贴一遍viewlog看看，看看有什么变化没有
今天去超市买东西，结账排了一大队人，到我以后，收银员刷条码刷了半天却有一袋面粉刷不上，说：“先生，下次再买吧。”
“不成，凭啥啊，我这排半天队，你再成都癫痫病医院刷几次。”
还是不成，收银员问我在哪儿拿的面粉，她去查价格，不一会她气喘吁吁地回来说：“先生，我们超市没这种面粉，你把我们面包房的面粉给扛过来了。”