铺铜出现out of date shapes

铺铜出现out of date shapes?

如何解决，急啊！

  Dynamic shapes out of date: 1 out of 26
  Current fill mode         : SMOOTH

  Layer = TOP
     State: No Etch      Point on shape: (2334.00 263.00) Net: GND
     State: Smooth       Point on shape: (7021.00 1240.00) Net: N733759
     State: Smooth       Point on shape: (6386.00 1344.00) Net: N720197
     State: Smooth       Point on shape: (6444.00 855.00) Net: GND
     State: Smooth       Point on shape: (5275.00 728.00) Net: N741041
     State: Smooth       Point on shape: (6076.00 1752.00) Net: +1.8VPCI
     State: Smooth       Point on shape: (6607.00 1238.00) Net: +3.3VPCI
     State: Smooth       Point on shape: (3656.00 1570.00) Net: +5VRF
     State: Smooth       Point on shape: (5794.00 2072.00) Net: 1.3V
     State: Smooth       Point on shape: (6182.00 1761.00) Net: GND
     State: Smooth       Point on shape: (3339.00 2014.00) Net: +1.8VRF

  Dynamic shapes out of date: 1 out of 26
  Current fill mode         : SMOOTH

  Layer = TOP
     State: No Etch      Point on shape: (2334.00 263.00) Net: GND
     State: Smooth       Point on shape: (7021.00 1240.00) Net: N733759
     State: Smooth       Point on shape: (6386.00 1344.00) Net: N720197
     State: Smooth       Point on shape: (6444.00 855.00) Net: GND
     State: Smooth       Point on shape: (5275.00 728.00) Net: N741041
     State: Smooth       Point on shape: (6076.00 1752.00) Net: +1.8VPCI
     State: Smooth       Point on shape: (6607.00 1238.00) Net: +3.3VPCI
     State: Smooth       Point on shape: (3656.00 1570.00) Net: +5VRF
     State: Smooth       Point on shape: (5794.00 2072.00) Net: 1.3V
     State: Smooth       Point on shape: (6182.00 1761.00) Net: GND
     State: Smooth       Point on shape: (3339.00 2014.00) Net: +1.8VRF

 db doctor

怎么用?

没遇到过哦

当shape出现问题时，可以执行下面操作，执行shape>manual void>delete,然后选中要操作的shape，右键执行Delete All voids即可。然后重新删除Islands一般就可以解决shape出现的一些问题。

kank

kankan

！

你都给删除了这貌似不是解决问题吧

直接UPDATA TO SMOOTH

找出 相关点 然后修正边界