schematic名字太长，出现错误怎么解决
时间：10-02
整理：3721RD
点击：
Device library error detected.
Problems with the name of device 'CON_F36ST_D6MT_SM_F-ST-SM-AA22L-S036VA1': 'Name is too long.'.
Device 'CON_F36ST_D6MT_SM_F-ST-SM-AA22L' has library errors. Unable to transfer to Allegro.
有高手能帮我解决一下这个问题吗?
Problems with the name of device 'CON_F36ST_D6MT_SM_F-ST-SM-AA22L-S036VA1': 'Name is too long.'.
Device 'CON_F36ST_D6MT_SM_F-ST-SM-AA22L' has library errors. Unable to transfer to Allegro.
有高手能帮我解决一下这个问题吗?
在Create Netlist的时候，在PCB Editor选项页中，点击Setup，将Miscellaneous中的Device/Net/Pin Name Char Limit的值改大一点就可以了。我现在使用了60。当然在Allegro PCB Editor里面也改成相同的值。