linux-2.6.14移植:NET: Registered protocol family 1卡住
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 99 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1(停在这有3-5分钟,之后才输出后面的信息)
VFS: Mounted root (jffs filesystem).
Freeing init memory: 104K
Warning: unable to open an initial console.
Failed to execute /linuxrc. Attempting defaults...
Kernel panic - not syncing: No init found. Try passing init= option to kernel.
从红色后面的信息也可以看出,VFS安装的是jffs文件系统,而我们是要安装yaffs2文件系统,问题就出在这。再次
make menuconfig,去掉jffs即可!这个问题的难点在于:红色后面的信息要等很久才出现,不看后面的信息很难定位错误!
linux-2 6 14移植S3C244 相关文章:
- 基于飞凌2440开发板的linux-2.6.28移植过程(11-25)
- linux-2.6.30.4移植至2440开发板(11-22)
- linux-2.6.14移植到S3C2440(11-22)
- linux-2.6.14挂载NFS文件系统(11-22)
- linux-2.6.35.3内核移植(s3c2440)(11-20)
- TE2410移植linux-2.6.14及调试过程总结(1)(11-10)