教你如何在410c开发板上玩Break Ball游戏

et install -y man-db manpages manpages-dev

sudo apt-get install -y libpython-dev libpython3-dev python-dev

sudo apt-get install -y arduino-mk arduino

sudo apt-get install -y libmraa-dev libupm-dev libsoc-dev

sudo apt-get install -y scratch python-pip

pip install spidev

sudo apt-get clean

#extract the tar file

tar -vxf ~/breakerball.tar

#attempt t0 install the Arduino program on the Sensors board

cd breakerball_sensor

make upload

#place the appropriate icon on the desktop

if ［ "$？" = "0" ］; then

sudo cp pyupm_i2clcd.py /usr/lib/python2.7/dist-packages/pyupm_i2clcd.py

cp ~/breakerball_sensor/go ~/Desktop/BreakerBall_Sensor

else

sudo dd if=~/boot-db410c.img of=/dev/mmcblk0p8

cp ~/breakerball_linker/go ~/Desktop/BreakerBall_Linker

fi

echo Issue the following command manually

echo sudo reboot now