LX110T的板子上跑demo的时候遇到的一些错误的解决办法总结

.前一段时间在玩xilinx送我在跑XUPV5-LX110T，首先跑xilinx给出的XUPV5-LX110T的demo设计，结果发现遇到了一些错误但是自己在网上发现很少有答案，就把自己的一些总结贴出来：
（1）xupv5_bsb_std_ip时出现了问题，其错误描述如下：
[xupv5_bsb_system.ucf(1110)]: NET "xps_iic_0_Gpo_pin" not found. Please
verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
IOSTANDARD=LVCMOS33;> [xupv5_bsb_system.ucf(1111)]: NET "xps_iic_0_Gpo_pin"
not found. Please verify that:
1. The specified design element actually exists in the original design.
2. The specified object is spelled correctly in the constraint source file.
make: *** [__xps/xupv5_bsb_system_routed] Error 1
解决办法：打开xupv5_bsb_std_ip文件夹里面的xupv5_bsb_system.mhs文件，
在其80行的位置，将PORT xps_iic_0_Gpo_pin = xps_iic_0_Gpo, DIR = O, VEC = [31:31]注释掉（即在前面加上#即可）或删除。
在其551行的位置，将 PORT Gpo = xps_iic_0_Gpo注释掉（即在前面加上#即可）或删除。
保存该文件。
然后打开xupv5_bsb_std_ip文件夹里面的xupv5_bsb_system.ucf文件
在其1110行和1111行的位置，将Net xps_iic_0_Gpo_pin LOC=AK6; # DVI_RESET_B
Net xps_iic_0_Gpo_pin IOSTANDARD=LVCMOS33;两行删除或者注释掉。
保存该文件即可。

（2）.Running DRCs for OSes, Drivers and Libraries ...
Runnning DRC for lwIP library...

ERROR:MDT - issued from TCL procedure "::sw_lwip_v3_00_a::lwip_drc" line 12
lwip () - No Ethernet MAC cores are addressable from processor ppc440_0.
lwIP requires atleast one EMAC (xps_ethernetlite | xps_ll_temac) core.

ERROR:MDT - Error while running DRC for processor ppc440_0...
make: *** [ppc440_0/lib/libxil.a] Error 2
Done!

看到了这个问题，首先要学会自己找，上面明显提示是lwip出错，我们看一下datasheet就会发现： lwIP provides an easy way to add TCP/IP-based networking capability to an embedded systemlwip_v3_00_a in EDK provides adapters for the xps_ethernetlite and xps_ll_temac
Xilinx? Ethernet MAC cores, and is based on the lwIP stack version 1.2.0. This document
describes how to use lwip_v3_00_a to add networking capability to embedded software. 我们知道了它的作用，那就找吧，反正，xilinx里面是以mhs和mss文件为主线，那就行动吧
解决办法：在mss文件里找到# BEGIN LIBRARY
PARAMETER LIBRARY_NAME = lwip
PARAMETER LIBRARY_VER = 3.00.a
PARAMETER PROC_INSTANCE = microblaze_0
PARAMETER api_mode = SOCKET_API
END
将其注释掉或者删除。

（3）.ERROR: Failed to add write permission for

D:\..\microblaze_0\libsrc\lcd_ip_v1_00_a\

ERROR:Failed to copy

D:\..\drivers\lcd_ip_v1_00_a\src\ to

D:\..\microblaze_0\libsrc\lcd_ip_v1_00_a\

Copying files for driver cpu_v1_11_b from

D:\Xilinx\11.1\EDK\sw\XilinxProcessorIPLib\drivers\cpu_v1_11_b\src\ to

ERROR: Error while running "Copy Files" for processor microblaze_0...

make: *** [microblaze_0/lib/libxil.a] Error 2

Done!
解决办法：到桌面右键单击我的电脑，选择属性，再选择高级这一栏，单击环境变量，在新弹出的环境变量对话框下，单击系统变量的新建按钮，输入变量名：CYGWIN
在变量值中输入：nontsec，单击OK，重新启动XPS，重新编译即可。

（4）.ERROR:EDK - D:\Xilinx\sample\xupv5_bsb_std_ip\xupv5_bsb_system.mhs line 392 - PARAMETER C_LEFT_POS has value 7 which does not fall in the range (0:C_SPLIT-1), specified in MPD
ERROR:EDK - D:\Xilinx\sample\xupv5_bsb_std_ip\xupv5_bsb_system.mhs line 393 - PARAMETER C_SPLIT has value 31 which does not fall in the range (1:C_SIZE_IN-1), specified in MPD
ERROR:EDK - D:\Xilinx\sample\xupv5_bsb_std_ip\xupv5_bsb_system.mhs line 392 - PARAMETER C_LEFT_POS has value 7 which does not fall in the range (0:C_SPLIT-1), specified in MPD
ERROR:EDK - D:\Xilinx\sample\xupv5_bsb_std_ip\xupv5_bsb_system.mhs line 393 - PARAMETER C_SPLIT has value 31 which does not fall in the range (1:C_SIZE_IN-1), specified in MPD