求助Allegro16.2生成Artwork出现的问题

      跪求Allegro16.2生成artwork出现报错解决方法     ：

Results from parameter file ...
    DEVICE-TYPE           GERBER_RS274X
    OUTPUT-UNITS          INCHES
    FILM-SIZE             24000 16000
    FORMAT                5.3
    ABORT-ON-ERROR        NO
    SCALE                 1
    SUPPRESS-LEAD-ZEROES  YES
    SUPPRESS-TRAIL-ZEROES NO
    SUPPRESS-EQUAL        YES
    UNDEF-APT-CONT        NO
WARNING: for raster artwork formats, artwork accuracy must be
  at least one place greater than the database accuracy, up
  to the maximum accuracy allowed by the selected output format.
  Increase the accuracy by increasing the "Decimal Places" in
  the FORMAT section of the artwork parameters and then rerun
  artwork.
  The current output is rounding down the data.  Failure to change
  the format may result in inaccurate arc coordinates in the output
  files and possible shape/void plotting failures.

================================================================
     PROCESSING FILM < POWER >
     TO FILE < E:/highvision/project/RK/RK3168/pcb/POWER.art > ...
================================================================
  FILM PARAMETERS :
  ---------------------------------------------------------
  Undefined line width                6.000
  Mirror code                         NONE
  Rotate angle                        NONE
  Offset x:                           0.000
  Offset y:                           0.000
  Plot negative                       NO
  Suppress unconnected internal pads  NO
    WARNING: Film contains DRC error(s).
    WARNING: Segment with same start and end points at
        (312.890 -1452.988) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (1074.500 -1458.000) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-1203.819 -1693.181) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-1128.882 -925.181) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-1128.882 -903.642) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-812.469 -725.142) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-812.461 -725.059) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-768.260 -730.799) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at
        (-943.358 -527.441) will be ignored. Increasing output
        accuracy may allow segment to be generated.
    WARNING: Segment with same start and end points at