请教PADS logic和Layout文件中的封装如何保存到库中去
时间：10-02
整理：3721RD
点击：
用pads不是很熟，别人画好的logic和layout文件，在我电脑上打开后不能在logic里用“layout/router link properties” 功能，compare PCB后报错如下，应该是我的电脑里没有这些封装;
请教：怎么样把画好的logic和layout文件里的封装（PART TYPE, CAE, DECAL）保存到我的库中，一个一个点“Edit decal”再保存的话太麻烦了，有没有快速的办法。期待高手。
PCB Net List Errors Report - xxxxxxpcb.sch - Tue May 25 08:52:38 2010
----------------------------------------------------------------------------------
Design to Library Part Consistency Check
----------------------------------------
Part Type Z8HM2-I not found in Library - not able to check following parts:
U1.
Part Type L0402 not found in Library - not able to check following parts:
L2 L40 L1 L3 L4 L5 L6 L31 L7 L8
L53 L52.
.
.
.
Single/Zero Pin Net Warnings
----------------------------
Net ANT has less than two pins in PCB net list file.
Schematic Connectivity Errors
-----------------------------
Subnets with Off-Page Reference to no other Subnet
ANT
ZI2121 X13260 Y4810
请教：怎么样把画好的logic和layout文件里的封装（PART TYPE, CAE, DECAL）保存到我的库中，一个一个点“Edit decal”再保存的话太麻烦了，有没有快速的办法。期待高手。
PCB Net List Errors Report - xxxxxxpcb.sch - Tue May 25 08:52:38 2010
----------------------------------------------------------------------------------
Design to Library Part Consistency Check
----------------------------------------
Part Type Z8HM2-I not found in Library - not able to check following parts:
U1.
Part Type L0402 not found in Library - not able to check following parts:
L2 L40 L1 L3 L4 L5 L6 L31 L7 L8
L53 L52.
.
.
.
Single/Zero Pin Net Warnings
----------------------------
Net ANT has less than two pins in PCB net list file.
Schematic Connectivity Errors
-----------------------------
Subnets with Off-Page Reference to no other Subnet
ANT
ZI2121 X13260 Y4810
期待高手
在logic和layout文件中，选中所有元件——右键 save to library 即可，
在logic和layout文件中，选中所有元件——右键 save to library 即可，
过滤器里选择parts-----ctrl+A选择所有-----右键选择save to library----保存到了你自己的库里就可以了。
谢谢 又学会了一招