51单片机与rfid串口
时间：10-02
整理：3721RD
点击：
前几天在淘宝上买了一个frid的板子，然后就只有一个用户手册，在手册上发现一家公司，去主页找到了一份与51的代码，如下，然后就是我在串口发命令可以吧买的电子标签的UID读出来，可是在程序中就是读不到，求大神帮忙分析一下程序：
////////////////////////////////////////////////////////////
//Test SL025x
//MCS51 source code
////////////////////////////////////////////////////////////
#include <reg52.h>
#include <string.h>
#define true 1
#define false 0
//#define OSC_FREQ 22118400L
#define OSC_FREQ 13560000L
#define TIME0_10ms 65536L - OSC_FREQ/1200L
#define BOUND4800 256 - 24
#define BOUND9600 256 - 12
#define BOUND14400 256 - 8
#define BOUND19200 256 - 6
#define BOUND28800 256 - 4
#define BOUND38400 256 - 3
#define BOUND57600 256 - 2
#define BOUND115200 256 - 1
//IO definition
sbit CARDIN = P1^0;
sbit led =P1^1;
void InitializeSystem();
void SendCom(unsigned char *g_cCommand);
void StartTime(unsigned int _MS);
void StopTime();
char ReadWriteUltralight(void);
char ReadWriteMifareStd(void);
//Command List, preamble + length + command code + data frame
unsigned char code SelectCard[4] = {0xBA,0x02,0x01,0xB9};
unsigned char code LoginSector0[11] = {0xBA,0x0A,0x02,0x00,0xAA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
unsigned char code LoginSector1[11] = {0xBA,0x0A,0x02,0x01,0xAA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
unsigned char code ReadBlock1[4] = {0xBA,0x03,0x03,0x01};
unsigned char code WriteBlock1[20] = {0xBA,0x13,0x04,0x01,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF};
unsigned char code ReadValue[4] = {0xBA,0x03,0x05,0x05};
unsigned char code InitializeValue[8] ={0xBA,0x07,0x06,0x04,0x00,0x00,0x00,0x01};
unsigned char code IncrementValue[8] = {0xBA,0x07,0x08,0x04,0x00,0x00,0x00,0x20};
unsigned char code DecrementValue[8] = {0xBA,0x07,0x09,0x04,0x03,0x00,0x00,0x00};
unsigned char code CopyValue[5] = {0xBA,0x04,0x0A,0x04,0x05};
unsigned char code ReadULPage5[4] = {0xBA,0x03,0x10,0x05};
unsigned char code WriteULPage5[8] = {0xBA,0x07,0x11,0x05,0x11,0x22,0x33,0x44};
unsigned char code TurnOnRedLed[4] = {0xBA,0x03,0x40,0x01};
unsigned char code TurnOffRedLed[4] = {0xBA,0x03,0x40,0x00};
unsigned char g_ucReceBuf[21];
unsigned char g_ucReceNum;
unsigned char g_ucWatchTime;
unsigned char g_ucCardType;
char g_cStatus;
char g_cErr;
bit g_bReceOver;
bit g_bReceReady;
bit g_bTimeOut;
void main()
{
InitializeSystem();
while(1)
{
while (！CARDIN)
{
g_cErr = 0;
//Get the unique serial number of Mifare Card
SendCom(SelectCard); //
StartTime(8); //waitting until receive response from SL013 or over 80ms
while (！g_bReceOver && ！g_bTimeOut); //
StopTime(); //
if ((g_ucReceBuf[2]！=0x01) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ led = 0;continue; }
if (g_ucReceBuf[1] == 8)
{
g_ucCardType = g_ucReceBuf[8];
// if(g_ucReceBuf[9]==0x11)
// {
//
// }
}
else
{
g_ucCardType = g_ucReceBuf[11];
}
switch(g_ucCardType)
{
case 1://Mifare 1k 4 byte UID
case 2://Mifare 1k 7 byte UID
g_cStatus = ReadWriteMifareStd( );
if (g_cStatus ！= true)
{ g_cErr = 3; }
break;
case 3://Mifare_UltraLight
g_cStatus = ReadWriteUltralight( );
if (g_cStatus ！= true)
{ g_cErr = 3; }
break;
case 4://Mifare 4k 4 byte UID
case 5://Mifare 4k 7 byte UID
g_cStatus = ReadWriteMifareStd( );
if (g_cStatus ！= true)
{ g_cErr = 3; }
break;
case 6://Mifare_DesFire
g_cErr = 4;
break;
default:
g_cErr = 3;
break;
}
//Glare Red_Led to indicate working ok
if (g_cErr == 0)
{
SendCom(TurnOnRedLed);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
StartTime(20);
while (！g_bTimeOut);
StopTime();
SendCom(TurnOffRedLed);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
}
}
}
}
////////////////////////////////////////////////////////////
char ReadWriteUltralight(void)
{
//Write data to page5 of UltraLight
SendCom(WriteULPage5);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x11) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//read data from page5 of UltraLight
SendCom(ReadULPage5);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x10) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Compare read data with written data
if (memcmp(&WriteULPage5[4], &g_ucReceBuf[4], 4) ！= 0 )
{ return false; }
else
{ return true; }
}
////////////////////////////////////////////////////////////
char ReadWriteMifareStd(void)
{
long lPurseValue;
//Verify password of sector0
SendCom(LoginSector0);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x02) || (g_ucReceBuf[3]！=2) || g_bTimeOut)
{ return false; }
//Write data to block1
SendCom(WriteBlock1);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x04) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
if (memcmp(&WriteBlock1[4], &g_ucReceBuf[4], 16) ！= 0)
{ return false; }
//Read data from block1
SendCom(ReadBlock1);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x03) ||(g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Compare read data with written data
if (memcmp(&WriteBlock1[4], &g_ucReceBuf[4], 16) ！= 0)
{ return false; }
//Verify password of sector1
SendCom(LoginSector1);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x02) || (g_ucReceBuf[3]！=2) || g_bTimeOut)
{ return false; }
//Initialize block4 to one purse, and value = 0x01000000
SendCom(InitializeValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x06) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
if (memcmp(&InitializeValue[4], &g_ucReceBuf[4], 4) ！= 0)
{ return false; }
//Increment
SendCom(IncrementValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x08) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Decrement
SendCom(DecrementValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x09) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Backup purse to blcok5
SendCom(CopyValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x0A) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Read purse value from blcok5
SendCom(ReadValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x05) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Check value
lPurseValue = g_ucReceBuf[7]*0x1000000 + g_ucReceBuf[6]*0x10000 + g_ucReceBuf[5]*0x100 + g_ucReceBuf[4];
if (lPurseValue ！= 0x01000000 + 0x20000000 - 0x00000003)
{ return false; }
else
{ return true; }
}
////////////////////////////////////////////////////////////
void InitializeSystem()
{
TMOD &= 0x0F;
TMOD |= 0x21;
PCON |= 0x80;
SCON = 0x50;
TH1 = TL1 = BOUND115200;
g_ucReceNum = 0;
g_bReceOver = 0;
g_bReceReady = 0;
TR1 = 1;
IE |= 0x90;
}
////////////////////////////////////////////////////////////
void StartTime(unsigned int _MS)
{
TH0 = (unsigned char)((TIME0_10ms>>8)&0xFF);
TL0 = (unsigned char)(TIME0_10ms&0xFF);
g_ucWatchTime = _MS;
g_bTimeOut = 0;
ET0 = 1;
TR0 = 1;
}
////////////////////////////////////////////////////////////
time0_int () interrupt 1 using 1
{
TH0 = (unsigned char)((TIME0_10ms>>8) & 0xFF);
TL0 = (unsigned char)(TIME0_10ms & 0xFF);
if (g_ucWatchTime--==0)
{ g_bTimeOut = 1; }
}
////////////////////////////////////////////////////////////
void StopTime()
{
ET0 = 0;
TR0 = 0;
}
////////////////////////////////////////////////////////////
//Send command to SL025
////////////////////////////////////////////////////////////
void SendCom(unsigned char *g_cCommand)
{
unsigned char i,chkdata,sendleg;
ES = 0;
sendleg = *(g_cCommand+1) + 1;
chkdata = 0;
for(i=0; i<sendleg; i++)
{
chkdata ^= *(g_cCommand+i);
TI = 0;
SBUF = *(g_cCommand+i);
while(！TI);
}
TI = 0;
SBUF = chkdata;
while (！TI);
TI = 0;
g_bReceReady = 1;
g_bReceOver = 0;
ES = 1;
}
/////////////////////////////////////////////////////////////////////
//Get result from SL025
/////////////////////////////////////////////////////////////////////
seri_int () interrupt 4 using 1
{
unsigned char i,j;
unsigned char rece_data = SBUF;
unsigned char verify = 0;
if(RI)
{
RI = 0;
if (g_bReceReady)
{
switch (rece_data)
{
case 0xBD:
g_bReceReady = 0;
g_bReceOver = 0;
g_ucReceNum = 0;
g_ucReceBuf[0] = 0xBD;
g_ucReceBuf[1] = 0;
break;
default:
g_ucReceNum++;
break;
}
}
else
{
i = ++g_ucReceNum;
g_ucReceBuf[i] = rece_data;
if (g_ucReceBuf[1] == g_ucReceNum - 1)
{
for (j=0; j<g_ucReceNum+1; j++)
{ verify ^= g_ucReceBuf[j]; }
g_bReceOver = 1;
ES = 0;
}
if (g_ucReceNum > sizeof(g_ucReceBuf))
{
g_bReceOver = 0;
g_ucReceNum = 0;
}
}
}
if(TI)
{
TI = 0;
}
}
发命令 是BA 02 01 B9，B9是前几位的异或值，回应应该为BD+08+01+00+uid+01+(前几位异或值)
////////////////////////////////////////////////////////////
//Test SL025x
//MCS51 source code
////////////////////////////////////////////////////////////
#include <reg52.h>
#include <string.h>
#define true 1
#define false 0
//#define OSC_FREQ 22118400L
#define OSC_FREQ 13560000L
#define TIME0_10ms 65536L - OSC_FREQ/1200L
#define BOUND4800 256 - 24
#define BOUND9600 256 - 12
#define BOUND14400 256 - 8
#define BOUND19200 256 - 6
#define BOUND28800 256 - 4
#define BOUND38400 256 - 3
#define BOUND57600 256 - 2
#define BOUND115200 256 - 1
//IO definition
sbit CARDIN = P1^0;
sbit led =P1^1;
void InitializeSystem();
void SendCom(unsigned char *g_cCommand);
void StartTime(unsigned int _MS);
void StopTime();
char ReadWriteUltralight(void);
char ReadWriteMifareStd(void);
//Command List, preamble + length + command code + data frame
unsigned char code SelectCard[4] = {0xBA,0x02,0x01,0xB9};
unsigned char code LoginSector0[11] = {0xBA,0x0A,0x02,0x00,0xAA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
unsigned char code LoginSector1[11] = {0xBA,0x0A,0x02,0x01,0xAA,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
unsigned char code ReadBlock1[4] = {0xBA,0x03,0x03,0x01};
unsigned char code WriteBlock1[20] = {0xBA,0x13,0x04,0x01,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,0xEE,0xFF};
unsigned char code ReadValue[4] = {0xBA,0x03,0x05,0x05};
unsigned char code InitializeValue[8] ={0xBA,0x07,0x06,0x04,0x00,0x00,0x00,0x01};
unsigned char code IncrementValue[8] = {0xBA,0x07,0x08,0x04,0x00,0x00,0x00,0x20};
unsigned char code DecrementValue[8] = {0xBA,0x07,0x09,0x04,0x03,0x00,0x00,0x00};
unsigned char code CopyValue[5] = {0xBA,0x04,0x0A,0x04,0x05};
unsigned char code ReadULPage5[4] = {0xBA,0x03,0x10,0x05};
unsigned char code WriteULPage5[8] = {0xBA,0x07,0x11,0x05,0x11,0x22,0x33,0x44};
unsigned char code TurnOnRedLed[4] = {0xBA,0x03,0x40,0x01};
unsigned char code TurnOffRedLed[4] = {0xBA,0x03,0x40,0x00};
unsigned char g_ucReceBuf[21];
unsigned char g_ucReceNum;
unsigned char g_ucWatchTime;
unsigned char g_ucCardType;
char g_cStatus;
char g_cErr;
bit g_bReceOver;
bit g_bReceReady;
bit g_bTimeOut;
void main()
{
InitializeSystem();
while(1)
{
while (！CARDIN)
{
g_cErr = 0;
//Get the unique serial number of Mifare Card
SendCom(SelectCard); //
StartTime(8); //waitting until receive response from SL013 or over 80ms
while (！g_bReceOver && ！g_bTimeOut); //
StopTime(); //
if ((g_ucReceBuf[2]！=0x01) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ led = 0;continue; }
if (g_ucReceBuf[1] == 8)
{
g_ucCardType = g_ucReceBuf[8];
// if(g_ucReceBuf[9]==0x11)
// {
//
// }
}
else
{
g_ucCardType = g_ucReceBuf[11];
}
switch(g_ucCardType)
{
case 1://Mifare 1k 4 byte UID
case 2://Mifare 1k 7 byte UID
g_cStatus = ReadWriteMifareStd( );
if (g_cStatus ！= true)
{ g_cErr = 3; }
break;
case 3://Mifare_UltraLight
g_cStatus = ReadWriteUltralight( );
if (g_cStatus ！= true)
{ g_cErr = 3; }
break;
case 4://Mifare 4k 4 byte UID
case 5://Mifare 4k 7 byte UID
g_cStatus = ReadWriteMifareStd( );
if (g_cStatus ！= true)
{ g_cErr = 3; }
break;
case 6://Mifare_DesFire
g_cErr = 4;
break;
default:
g_cErr = 3;
break;
}
//Glare Red_Led to indicate working ok
if (g_cErr == 0)
{
SendCom(TurnOnRedLed);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
StartTime(20);
while (！g_bTimeOut);
StopTime();
SendCom(TurnOffRedLed);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
}
}
}
}
////////////////////////////////////////////////////////////
char ReadWriteUltralight(void)
{
//Write data to page5 of UltraLight
SendCom(WriteULPage5);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x11) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//read data from page5 of UltraLight
SendCom(ReadULPage5);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x10) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Compare read data with written data
if (memcmp(&WriteULPage5[4], &g_ucReceBuf[4], 4) ！= 0 )
{ return false; }
else
{ return true; }
}
////////////////////////////////////////////////////////////
char ReadWriteMifareStd(void)
{
long lPurseValue;
//Verify password of sector0
SendCom(LoginSector0);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x02) || (g_ucReceBuf[3]！=2) || g_bTimeOut)
{ return false; }
//Write data to block1
SendCom(WriteBlock1);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x04) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
if (memcmp(&WriteBlock1[4], &g_ucReceBuf[4], 16) ！= 0)
{ return false; }
//Read data from block1
SendCom(ReadBlock1);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x03) ||(g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Compare read data with written data
if (memcmp(&WriteBlock1[4], &g_ucReceBuf[4], 16) ！= 0)
{ return false; }
//Verify password of sector1
SendCom(LoginSector1);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x02) || (g_ucReceBuf[3]！=2) || g_bTimeOut)
{ return false; }
//Initialize block4 to one purse, and value = 0x01000000
SendCom(InitializeValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x06) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
if (memcmp(&InitializeValue[4], &g_ucReceBuf[4], 4) ！= 0)
{ return false; }
//Increment
SendCom(IncrementValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x08) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Decrement
SendCom(DecrementValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x09) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Backup purse to blcok5
SendCom(CopyValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x0A) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Read purse value from blcok5
SendCom(ReadValue);
StartTime(8);
while (！g_bReceOver && ！g_bTimeOut);
StopTime();
if ((g_ucReceBuf[2]！=0x05) || (g_ucReceBuf[3]！=0) || g_bTimeOut)
{ return false; }
//Check value
lPurseValue = g_ucReceBuf[7]*0x1000000 + g_ucReceBuf[6]*0x10000 + g_ucReceBuf[5]*0x100 + g_ucReceBuf[4];
if (lPurseValue ！= 0x01000000 + 0x20000000 - 0x00000003)
{ return false; }
else
{ return true; }
}
////////////////////////////////////////////////////////////
void InitializeSystem()
{
TMOD &= 0x0F;
TMOD |= 0x21;
PCON |= 0x80;
SCON = 0x50;
TH1 = TL1 = BOUND115200;
g_ucReceNum = 0;
g_bReceOver = 0;
g_bReceReady = 0;
TR1 = 1;
IE |= 0x90;
}
////////////////////////////////////////////////////////////
void StartTime(unsigned int _MS)
{
TH0 = (unsigned char)((TIME0_10ms>>8)&0xFF);
TL0 = (unsigned char)(TIME0_10ms&0xFF);
g_ucWatchTime = _MS;
g_bTimeOut = 0;
ET0 = 1;
TR0 = 1;
}
////////////////////////////////////////////////////////////
time0_int () interrupt 1 using 1
{
TH0 = (unsigned char)((TIME0_10ms>>8) & 0xFF);
TL0 = (unsigned char)(TIME0_10ms & 0xFF);
if (g_ucWatchTime--==0)
{ g_bTimeOut = 1; }
}
////////////////////////////////////////////////////////////
void StopTime()
{
ET0 = 0;
TR0 = 0;
}
////////////////////////////////////////////////////////////
//Send command to SL025
////////////////////////////////////////////////////////////
void SendCom(unsigned char *g_cCommand)
{
unsigned char i,chkdata,sendleg;
ES = 0;
sendleg = *(g_cCommand+1) + 1;
chkdata = 0;
for(i=0; i<sendleg; i++)
{
chkdata ^= *(g_cCommand+i);
TI = 0;
SBUF = *(g_cCommand+i);
while(！TI);
}
TI = 0;
SBUF = chkdata;
while (！TI);
TI = 0;
g_bReceReady = 1;
g_bReceOver = 0;
ES = 1;
}
/////////////////////////////////////////////////////////////////////
//Get result from SL025
/////////////////////////////////////////////////////////////////////
seri_int () interrupt 4 using 1
{
unsigned char i,j;
unsigned char rece_data = SBUF;
unsigned char verify = 0;
if(RI)
{
RI = 0;
if (g_bReceReady)
{
switch (rece_data)
{
case 0xBD:
g_bReceReady = 0;
g_bReceOver = 0;
g_ucReceNum = 0;
g_ucReceBuf[0] = 0xBD;
g_ucReceBuf[1] = 0;
break;
default:
g_ucReceNum++;
break;
}
}
else
{
i = ++g_ucReceNum;
g_ucReceBuf[i] = rece_data;
if (g_ucReceBuf[1] == g_ucReceNum - 1)
{
for (j=0; j<g_ucReceNum+1; j++)
{ verify ^= g_ucReceBuf[j]; }
g_bReceOver = 1;
ES = 0;
}
if (g_ucReceNum > sizeof(g_ucReceBuf))
{
g_bReceOver = 0;
g_ucReceNum = 0;
}
}
}
if(TI)
{
TI = 0;
}
}
发命令 是BA 02 01 B9，B9是前几位的异或值，回应应该为BD+08+01+00+uid+01+(前几位异或值)
单片机的串口设置正确吗，单片机是用13.56兆的晶振吗
您好，我用的是51单片机，13.0592M，我把晶频率成这个也不中
官方给的和51 的默认是22118400L
单片机的波特率取决于晶振，更换了晶振，相应的波特率参数就要更改，对于51用11。0592M的波特率的时序比较准，或者是11。0592的倍数的。
你先换成程序原来使用的参数和晶振，先调通了再考虑是不是换晶振
请问怎么用读出卡号呢