求助（LOGIC错误）

由LOGIC发送到LAYOUT时padsnet的错误提示如下：
Single/Zero Pin Net Warnings
----------------------------
Net ARM_D16 has less than two pins in PCB net list file.
Net ARM_D17 has less than two pins in PCB net list file.
Net ARM_D18 has less than two pins in PCB net list file.
Net ARM_D19 has less than two pins in PCB net list file.
Net ARM_D20 has less than two pins in PCB net list file.
Net ARM_D21 has less than two pins in PCB net list file.
Net ARM_D22 has less than two pins in PCB net list file.
Net ARM_D23 has less than two pins in PCB net list file.
Net ARM_D24 has less than two pins in PCB net list file.
Net ARM_D25 has less than two pins in PCB net list file.
Net ARM_D26 has less than two pins in PCB net list file.
Net ARM_D27 has less than two pins in PCB net list file.
Net ARM_D28 has less than two pins in PCB net list file.
Net ARM_D29 has less than two pins in PCB net list file.
Net ARM_D30 has less than two pins in PCB net list file.
Net ARM_D31 has less than two pins in PCB net list file.
这个是总线上的
还有个错误
Schematic Connectivity Errors
-----------------------------
Dangling Connections with a Net Name
AIN1+
AD(MAX125)   X3250  Y3850
AD(MAX125)   X13450 Y7550
这个可以忽略不管吗?是不是非要用ＯＦＦ　ＰＡＧＥ的方式　我是用导线悬空定义了导线网络名而已

总线没连接好,你要选择NET,看那个网络有没有连通

问题已经解决  主要是自己是由PROTEL导入的元件引起的 看来不能偷懒阿 麻烦