Synchronizing two function generators
时间:04-07
整理:3721RD
点击:
Hi all,
Can anyone advise, I need to synchronize two signal generators. How do I do that and what signals should I look at to say the devices are synchronized.
Thanks in advance
Can anyone advise, I need to synchronize two signal generators. How do I do that and what signals should I look at to say the devices are synchronized.
Thanks in advance
use the trigger signal...
one of the function generators trigger output should be given to the others trigger input.. thats all... :)
Function or signal generators? They are 2 different things.
Signal gen: use the 10 MHz frequence reference on the back panel to drive the other signal generator as a slave. Observe both sine wave outputs on a 2 channel oscilloscope to make sure one signal is not "walking" in phase with respect to the other.
Synchronizing function generators 相关文章:
- Functionl Generator 600 MHz
- How to get this transfer function?
- Why we use most of the time cos function for representing signal ?
- The function of the resistor connected to the gate of PM20
- Optimaizing function versus freq
- compute the transfor function between Tx an Rx,the bandwith is confined with 1-10Mhz