Configuration to get a single ended output from MAX2606
时间：04-06
整理：3721RD
点击：
Hi all!
I need to get a single ended output from the MAX2606 VCO IC.
Can anyone one confirm that the configuration shown in following figure is correct or not?
If not please let me know the correct configuration.
MAX2606 datasheet: http://datasheets.maxim-ic.com/en/ds...05-MAX2609.pdf
I need to get a single ended output from the MAX2606 VCO IC.
Can anyone one confirm that the configuration shown in following figure is correct or not?
If not please let me know the correct configuration.
MAX2606 datasheet: http://datasheets.maxim-ic.com/en/ds...05-MAX2609.pdf
R1 and R2 need to be connected to Vcc. Also, normally you would number the chip pins 1,2,3 etc, not PS1, PS2 etc.
Keith
single Configuration ended 相关文章：
- How to unballance this single balanced mixer?
- How does single signal reception work in this transceiver?
- Can a transformer be used to convert single ended signal to differential signal?
- Single TCXO For Multiple ICs
- Monopole antenna is single ended or two terminal?
- Need help on single stub matching problem.